0
0

Radian Raptor-SD Ambidextrous Charging Handle AR-10 SR-25 Black

UPC: 817093020507

$159.95

82 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you shoot your AR-10 or SR-25 suppressed, you already know the deal. That extra dwell time forces a cloud of gas back through the receiver and right into your face after a few rounds. The Radian Raptor-SD is Radian's answer to that problem, using a patented ported shaft that channels excess gas down and forward instead of letting it puff back at you. It carries all the ambidextrous handling of the standard Raptor with the added gas-mitigation feature built into the shaft.

What the Ported Shaft on the Raptor-SD Does

The shaft is drilled with vent holes that reroute gas away from your line of sight when running a suppressor. Folks who've swapped over from a standard mil-spec or even other gas-buster handles tend to notice the difference right away, especially on shorter barrels where blowback is worst. Less gas in the face means you can run longer strings without choking up, and some users report their bolt carrier group stays cleaner and better lubricated between wipe-downs too.

Ambi Handling Built for Either Side

The Raptor-SD lets you charge with a full palm blade or a quick finger-thumb pinch from the strong or support side, so lefties finally get a handle that works with them instead of against them. Pull the left lever and just the latch moves; pull the right and both wings release together. The oversized levers are shaped the same on both sides with deep grooves, so they're easy to find in the dark, with gloves on, or when your hands are cold and wet.

Materials and Fitment on the Raptor-SD

It's machined from 7075-T6 aluminum with a MILSPEC Type 3 hard coat black anodized finish, so it holds up to the heavier .308 carrier without flexing. Smoothed edges cut down on snagging and are easy on your hands. This one fits most AR-10/SR-25 pattern rifles including the Aero M5, STAG-10, Armalite AR10, Knights Armament SR25, Daniel Defense DD5 V3/V4/V5, and DPMS Gen1 platforms. It will not work with proprietary designs like the SIG716, Savage MSR10, or Smith & Wesson M&P10. Made in the USA.

Key Specifications

  • Manufacturer: Radian Weapons
  • Model: Raptor-SD
  • Manufacturer Part Number: R0012
  • UPC: 817093020507
  • Platform: AR-10 / SR-25 / LR-308
  • Style: Ported, Ambidextrous
  • Material: 7075-T6 Aluminum
  • Finish: MILSPEC Type 3 Hard Coat Black Anodized
  • Color: Black
  • Length: 10.65 in
  • Product Type: Charging Handle
  • Country of Origin: Made in USA
  • Units per Box: 1

What’s Included

  • Radian Raptor-SD Ambidextrous Charging Handle (AR-10/SR-25)

Frequently Asked Questions

Does the Raptor-SD actually reduce gas to the face when shooting suppressed?

Yes. The ported shaft is drilled with vent holes that redirect gas down and forward instead of letting it blow back into your face. Users running short-barreled and suppressed rifles consistently report noticeably less blowback and being able to run longer strings without choking up. It works best on the platforms where gas is normally the worst, like short barrels with a can attached.

Will the Raptor-SD fit my AR-10 or SR-25?

It's built for most AR-10/SR-25 pattern rifles, including the Aero M5, STAG-10, Armalite AR10, Knights Armament SR25, Daniel Defense DD5 V3/V4/V5, and DPMS Gen1 uppers. It will not fit rifles with proprietary charging handle designs like the SIG716, Savage MSR10, or Smith & Wesson M&P10. If your rifle uses a standard DPMS Gen1 or Armalite AR10 style upper, you're good to go.

What's the difference between the Raptor-SD and the standard Raptor?

The handles and ambidextrous function are identical between the two. The difference is entirely in the shaft. The SD adds Radian's patented gas-porting vents that reroute blowback, so if you shoot suppressed the SD is the one you want. If you never run a can, the standard Raptor covers the ergonomic side just fine.

Is the Raptor-SD strong enough for the heavier .308 bolt carrier?

It is. This version is machined from 7075-T6 aluminum with a MILSPEC Type 3 hard coat anodized finish and is built specifically for the AR-10/SR-25 platform. That heavier carrier puts more force on the handle than a 5.56 gun, and this one is sized and hardened to take it without flexing.

Additional information

UPC

817093020507

Manufacturer

Manufacturer Part Number

R0012

Color

Black

Length

10.6500

Model

Product Type

Charging Handle

Shipping Weight

0.15

Style

Ported

Units per Box

1

Reviews

There are no reviews yet.

Be the first to review “Radian Raptor-SD Ambidextrous Charging Handle AR-10 SR-25 Black”