0
0

Midwest Industries MI Two-Chamber Muzzle Brake 1/2-28 5.56 Black

UPC: 816537018704

$44.95

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Midwest Industries MI Two-Chamber Muzzle Brake is one of those upgrades that punches way above its weight. It's built around a large dual-chamber body with three smaller ports on each side, and that layout does a real job of venting gas to the sides and pulling the muzzle back down between shots. On a .223 or 5.56 AR-15, that translates to a flatter-shooting rifle that lets you keep your dot or reticle parked on target through a string of rounds.

What the MI Two-Chamber Brake Does on the Range

Recoil on a 5.56 is already mild, so the real payoff here is muzzle control and sight recovery. Folks who've run this brake consistently mention how flat the rifle stays and how quickly they get back on target, with plenty noting tighter groups once it was installed. Fair warning that goes for any brake: it's loud and directs blast out to the sides, so ear protection and range etiquette matter. That's the trade-off for the performance.

Build and Fitment of the MI Muzzle Brake

This one is machined from tool steel and wears a manganese phosphate finish, which holds up to heat and hard use without a fuss. It carries standard 1/2-28 threads, so it drops onto the vast majority of .223/5.56 AR-15 barrels, and it'll happily ride a 1/2-28 threaded .22 LR barrel too. Everything Midwest Industries makes is produced in the U.S.A. and backed by their lifetime warranty, which tells you they stand behind it.

Getting the MI Two-Chamber Brake Installed

Installation is about as simple as muzzle devices get. A fresh crush washer comes in the box, so you thread it on, index the MI logo where you want it, and torque it down. If you'd rather run it clocked a specific way, a shim kit gives you finer control over timing. No proprietary tools, no headaches, just a straightforward swap that makes a noticeable difference the first time you pull the trigger.

Key Specifications

  • Manufacturer: Midwest Industries
  • Manufacturer Part Number: MI-MB4
  • UPC: 816537018704
  • Model: Two-Chamber Muzzle Brake
  • Product Type: Muzzle Brake
  • Caliber: .223 Rem / 5.56 NATO
  • Thread Pitch: 1/2-28
  • Design: Two-chamber with three ports per side
  • Material: Tool steel
  • Finish: Black manganese phosphate
  • Color: Black
  • Length: 5.35 in
  • Country of Origin: Made in the U.S.A.
  • Warranty: Midwest Industries Lifetime Warranty

What’s Included

  • Midwest Industries MI Two-Chamber Muzzle Brake
  • New crush washer

Frequently Asked Questions

What rifles will the MI two-chamber muzzle brake fit?

It uses standard 1/2-28 threads, so it fits the large majority of .223 and 5.56 NATO AR-15 barrels. It will also work on a .22 LR barrel that's threaded 1/2-28, like many Ruger rimfire rifles. Just confirm your barrel's thread pitch before ordering.

Does this brake actually reduce recoil on a 5.56?

Recoil on a 5.56 is already light, so the biggest benefit you'll feel is reduced muzzle climb and faster sight recovery between shots. The two-chamber, side-porting design keeps the rifle flat, and many owners report tighter groups and quicker follow-ups after installing it. You'll notice a bit of felt recoil reduction too, but the flat-shooting behavior is the real draw.

Is it loud, and does it throw blast to the sides?

Yes. Like any effective muzzle brake, it redirects gas and concussion out to the sides, so it's noticeably louder and pushier than a bare muzzle or flash hider. Good hearing protection is a must, and it's worth keeping in mind if you shoot next to others at the range.

Do I need any special tools to install the MI muzzle brake?

No special tools beyond what you'd normally use to torque a muzzle device. A new crush washer is included, so you thread the brake on, line up the MI logo, and torque it down. If you want to time it to a specific clock position, a shim kit gives you more precise control.

Additional information

UPC

816537018704

Manufacturer

Manufacturer Part Number

MI-MB4

Caliber/Gauge

.223 REM/5.56 NATO

Color

Black

Length

5.3500

Model

Product Type

Muzzle Brake

Reviews

There are no reviews yet.

Be the first to review “Midwest Industries MI Two-Chamber Muzzle Brake 1/2-28 5.56 Black”