0
0

Dead Air XEMAX Muzzle Brake .338 Cal 5/8-24 Nitride Black DA150

UPC: 810128161350

$71.99

45 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Big-bore rifles hit hard on both ends, and the Dead Air XEMAX was built with that in mind. This is Dead Air's Xeno mounting technology scaled up and beefed up for .33 caliber cartridges, with the DA150 rated for .338 Lapua Mag, .338-378 Weatherby Mag, 33XC, and 8.6 Blackout on a 5/8-24 threaded muzzle. Machined from alloy steel with a nitride finish, it shrugs off the heat and pressure these cartridges dish out without adding much to the end of your barrel. At 2.06 inches long, 1.125 inches in diameter, and right around 3.4 ounces, it stays compact enough for a precision rig or a hunting rifle.

How the XEMAX Brake Handles Recoil

Run it bare and the single-port design vectors gas outward and upward, which knocks down felt recoil and cuts the dust signature that side-blasting brakes kick up when you're shooting prone. That matters a lot behind a .338 Lapua, where a good brake is the difference between spotting your own hits and getting knocked off the glass every shot. The port orientation does require timing, and Dead Air includes shims in the package so you can index it correctly without hunting down extra hardware.

Built as a Mount for Dead Air Suppressors

The XEMAX pulls double duty as a suppressor mount. Its inherently concentric, self-aligning taper gives you consistent bore alignment and repeatable point of impact every time you attach your can. It pairs directly with the Nomax 33 silencer, and Primal owners can join in by adding the XEMAX adapter to their suppressor. Beyond convenience, mounting over the brake helps extend the service life of your silencer by taking some of the abuse off the baffle stack. Just make sure your suppressor's bore rating matches the cartridge you're running before you send it.

Key Specifications

  • Manufacturer: Dead Air Silencers
  • Model: XEMAX Muzzle Brake
  • Manufacturer Part Number: DA150
  • UPC: 810128161350
  • Caliber: .338 (rated for .338 Lapua Mag, .338-378 Wby Mag, 33XC, 8.6 Blackout)
  • Thread Pattern: 5/8"-24
  • Bore Diameter: .338
  • Length: 2.06 in
  • Diameter: 1.125 in
  • Weight: 3.40 oz
  • Material: Alloy Steel
  • Finish: Nitride, Black
  • Port Design: Single-port, timed
  • Suppressor Compatibility: Nomax 33 direct, Primal with XEMAX adapter

What’s Included

  • XEMAX muzzle brake
  • Timing shim set

Frequently Asked Questions

Which suppressors work with the Dead Air XEMAX muzzle brake?

The XEMAX mounts the Dead Air Nomax 33 directly, and it works with the Primal once you install the XEMAX adapter on that suppressor. It is not interchangeable with standard Xeno mounts since XEMAX is a larger, big-bore version of that system. Always double check that your suppressor's bore rating covers the cartridge you plan to shoot.

Does the XEMAX brake need to be timed?

Yes. The single-port design has to be indexed so the port faces the right direction, and Dead Air includes shims in the package to get it clocked correctly. It's a straightforward install if you've timed a brake before, and any gunsmith can knock it out quickly if you'd rather not.

What calibers is the DA150 XEMAX rated for?

This version has a .338 bore and 5/8-24 threads, and Dead Air rates it for .338 Lapua Magnum, .338-378 Weatherby Magnum, 33XC, and 8.6 Blackout. If your barrel has a different thread pitch, Dead Air offers the same brake in 3/4-24, M18x1, M18x1.5, and 3/4-20 versions.

Is the XEMAX worth running without a suppressor?

Definitely. As a standalone brake, the single-port design pushes gas outward and upward, which cuts felt recoil noticeably and keeps ground dust from blowing up in your face when shooting prone. That makes it easier to stay on target and spot your own impacts with hard-kicking big-bore cartridges.

Additional information

UPC

810128161350

Manufacturer

Manufacturer Part Number

DA150

Caliber/Gauge

.338 Caliber

Color

Black

Length

6

Model

Package Height

0.5

Package Width

4.5

Product Type

Accessory-Muzzle Brakes

Shipping Weight

0.231

Thread Pattern

5/8"x24

Reviews

There are no reviews yet.

Be the first to review “Dead Air XEMAX Muzzle Brake .338 Cal 5/8-24 Nitride Black DA150”