Description
The DURAMAG Speed magazine is a proven upgrade over older USGI designs, combining lightweight construction with dependable performance across any condition. At around 4 ounces, you'll notice the difference when running multiple magazines, and the gray anodized finish is genuinely part of the metal itself, not a coating applied on top, which means it won't wear off or chip away with regular use.
Built for Storage and Long-Term Reliability
One of the biggest advantages of aluminum over polymer is how it handles being loaded for extended periods. While polymer magazines can flex or swell when stored loaded, the 6061-T6 aluminum body on the Speed magazine maintains its exact dimensions indefinitely. The Everflex anti-fatigue spring won't lose tension from sitting loaded, and the orange anti-tilt follower keeps rounds perfectly aligned whether you're running it at the range or pulling it from a safe six months later.
Engineered for Consistent Feeding
DURAMAG uses proprietary LipLock technology to keep rounds secured and in proper alignment as they feed into the chamber. The Advanced Geometry Follower (AGF) stays level throughout the loading and feeding cycle, which nearly eliminates the jamming issues that can occur with less refined follower designs. Combined with the Post and Hole construction—where the two halves of the magazine are mechanically locked before being welded—you get durability that doesn't rely solely on welds holding things together.
What's Inside the Speed Magazine
Every Speed magazine ships with a complete internal setup. The Everflex spring is engineered for long life and ultimate reliability, rated for unlimited loaded storage. The orange AGF follower is color-coded for quick identification, and the T-360 total coating on the interior and exterior surfaces creates a smooth loading experience and resists corrosion from the inside out. Fully robotic welding during manufacturing ensures consistency from magazine to magazine.
Key Specifications
- Capacity: 30 rounds
- Caliber Compatibility: .223 Remington, 5.56x45mm NATO, .300 Blackout
- Material: 6061-T6 aluminum
- Finish: Type-III hard-coat anodized gray
- Follower Type: Orange anti-tilt AGF (Advanced Geometry Follower)
- Spring: Everflex anti-fatigue spring
- Follower Design: LipLock technology for round retention
- Construction Method: Post and Hole design with full robotic welding
- Interior Coating: T-360 total coating
- Approximate Weight: 4 ounces
- Platform Compatibility: AR-15 style rifles
- UPC: 766897410161
- Manufacturer Part Number: 3023002178CPD
- Manufacturer: DURAMAG
- Country of Origin: USA
What’s Included
- 1x DURAMAG Speed 30-round aluminum magazine
Frequently Asked Questions
Can I store the DURAMAG Speed magazine loaded?
Yes, the DURAMAG Speed is engineered for safe extended storage while fully loaded. The 6061-T6 aluminum body won't flex or swell like polymer, and the Everflex spring won't lose tension from being compressed indefinitely. You can load it and store it for months or years without any concern.
How does the aluminum construction compare to polymer magazines?
Aluminum magazines remain dimensionally stable in any temperature, whereas polymer can crack or swell in extreme heat or cold. The DURAMAG Speed is about 20-25% lighter than polymer alternatives, making a real difference when running multiple mags. The Type-III hard-coat anodizing creates a finish that's part of the metal itself, resisting wear better than coatings on other aluminum magazines.
What does the orange follower do?
The orange anti-tilt AGF (Advanced Geometry Follower) keeps rounds perfectly aligned as they move up the magazine stack. This nearly eliminates feeding jams and makes the follower easy to spot during reloads or when recovering dropped magazines. The geometry is specific to the caliber and capacity for optimal reliability.
Is the gray finish just a coating that will wear off?
No. Unlike some other magazines that apply a coating after anodizing, the DURAMAG Speed's gray color is created through the Type-III hard-coat anodizing process itself, making it part of the metal. This means it won't chip, peel, or wear away with regular handling or storage, though minor color variation can occur between batches due to the anodizing chemistry.





Reviews
There are no reviews yet.