Description
The True Precision Y-Micro Compensator is a tiny piece of hardware that punches above its size. Bolt this onto a threaded 9mm and you'll feel the dot or the sights settle faster between shots, which makes those quick strings at the range a whole lot more fun to run. It's built from solid 416R stainless bar stock, machined right here in the USA, and wrapped in a black nitride finish that shrugs off corrosion and wear while looking clean on just about any slide.
What Makes the Y-Micro Different
The secret is in the port work. This comp runs three slotted 90-degree ports paired with a tapered front crown, all cut to steer gas up and away from the muzzle. That's what knocks down muzzle flip and trims felt recoil, giving you a flatter shooting pistol without turning it into a boat anchor. Because it's a micro comp, it barely adds any length past your threads, so your gun still holsters and handles like it should.
Fitting the Y-Micro to Your Pistol
Threads are 1/2×28, which is the standard for threaded 9mm and .380 barrels. It was designed hand-in-glove with True Precision's own barrels, but it'll thread onto most aftermarket 9mm and .380 barrels sharing that pitch. Installation is refreshingly simple thanks to a built-in tension lock O-ring that lets you snug it up hand-tight and keeps it from backing off during a session. If you want a more permanent hold, a dab of medium-strength thread locker does the trick.
Matching Your Build
True Precision offers this comp in a whole spread of coatings, and this one wears black nitride for a low-key, blacked-out look that pairs with pretty much anything. Keep in mind that adding a comp can change how your pistol cycles, so it's worth paying attention to your recoil spring and ammo choice to keep everything running smooth. For a threaded 9mm that you want shooting flatter with almost no added footprint, the Y-Micro is a smart, well-made pick.
Key Specifications
- Manufacturer: True Precision
- Model: Y-Micro Micro Compensator
- Manufacturer Part Number: TP-YMICRO-BL
- UPC: 719104540922
- Caliber: 9mm / .380 ACP
- Thread Pattern: 1/2×28
- Material: 416R Stainless Steel
- Finish: Black Nitride
- Color: Black
- Port Design: Three slotted 90-degree ports with tapered front crown
- Installation: Tension lock O-ring, hand-tight
- Country of Origin: Made in USA
What’s Included
- True Precision Y-Micro Compensator
- Tension lock O-ring
Frequently Asked Questions
Will the Y-Micro Compensator fit my pistol?
It threads onto barrels with a 1/2×28 thread pitch, which is the common standard for threaded 9mm and .380 ACP barrels. It was designed specifically around True Precision barrels but works with most aftermarket 9mm and .380 barrels sharing that pitch. Double-check your barrel's thread pattern before ordering to be sure.
How do I install the Y-Micro Compensator?
It comes with a built-in tension lock O-ring that lets you thread it on hand-tight and keeps it from backing off during shooting. That makes it a simple install with no special tools required. If you want a semi-permanent hold, you can add a medium-strength thread locker.
Does adding this compensator affect how my pistol cycles?
It can. Redirecting gas at the muzzle changes the forces acting on your slide, so some setups may need a tweak to the recoil spring, lubrication, or ammo to run reliably. It's worth testing at the range and paying attention to how your pistol cycles after installing.
What is the Y-Micro Compensator made of and how durable is it?
It's machined from solid 416R stainless steel bar stock in the USA. The black nitride finish adds corrosion resistance and wear protection on top of the already tough stainless base. That combination holds up well to regular range use and the heat a muzzle device sees.




Reviews
There are no reviews yet.