0
0

True Precision TPG43BXT Threaded 9mm Barrel for Glock 43/43X

UPC: 719104534419

$170.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The True Precision TPG43BXT is built for the person who loves their little Glock 43 or 43X but wants more out of it. This is a fully machined drop-in barrel cut from certified 416R stainless steel, and it swaps straight into your factory slide without any gunsmithing. The 3.90-inch threaded length carries a 1/2×28 muzzle, so you can run a suppressor, a compensator, or just cap it with the included thread protector and carry it clean. Everything about it is designed and manufactured right here in the USA.

What Sets the TPG43BXT Barrel Apart

True Precision uses a proprietary broach-cut, 6-groove rifling pattern with a 1:10 right-hand twist, which is where the accuracy gains come from. The chamber is cut to a fully supported SAAMI spec and the feed ramp is widened and reworked over the OEM design, so the barrel handles a wide range of ammo, including hollow points, factory defensive loads, cast lead, and reloads. If you've ever been picky about what your carry gun will run, this is the kind of upgrade that tends to smooth those worries out.

Going Threaded With Your Glock 43/43X

The 1/2×28 thread pitch is the industry standard for 9mm, which means it pairs up with the vast majority of pistol suppressors and muzzle devices on the market. It's a natural match for True Precision's own True-Lock compensator, and it plays nice with cans from the usual makers too. When you're not running a device, the Viton high-heat integral O-ring thread protector threads on and stays put without backing loose under recoil.

Fit, Finish, and Real-World Use

This is the satin stainless version, which gives your build a bright, sharp look at the range and takes finish upgrades well if you want to dress it up later. Shooters who've run these report tight tolerances, a slide fit that drops in right where it should, and clean feeding straight out of the box. It's backed by a lifetime performance warranty for function, which tells you where True Precision stands on how these hold up over the long haul.

Key Specifications

  • Manufacturer: True Precision
  • Manufacturer Part Number: TP-G43B-XT
  • Model: TPG43BXT
  • UPC: 719104534419
  • Fits: Glock 43 / 43X
  • Caliber: 9mm
  • Barrel Length: 3.90 inches (overall)
  • Thread Pitch: 1/2×28
  • Rifling: Broach-cut, 6-groove
  • Twist Rate: 1:10 RH
  • Crown: 11-degree target
  • Material: Certified 416R Stainless Steel
  • Finish: Satin Stainless (Silver)
  • Chamber: Fully supported SAAMI spec
  • Country of Origin: USA
  • Warranty: Lifetime performance warranty for function

What’s Included

  • True Precision TPG43BXT threaded 9mm barrel
  • 1/2×28 thread protector with Viton high-heat integral O-ring lock

Frequently Asked Questions

Is the TPG43BXT a true drop-in install or do I need a gunsmith?

It's designed as a drop-in replacement, so it slides right into your factory Glock 43 or 43X slide with no gunsmithing needed. Just field strip the pistol, swap the OEM barrel for this one, and reassemble. As with any parts swap, it's smart to function check with a few rounds before you carry it.

Will this barrel work on a Glock 48 slide?

The Glock 43X and 48 share the same barrel dimensions, so this barrel commonly fits 48 slides as well as the 43 and 43X. If you're building on a 48 MOS or similar slide, it should drop right in. When in doubt, confirm your specific slide before ordering.

Can I mount a suppressor or compensator to the threads?

Yes. The 1/2×28 thread pitch is the standard for 9mm, so it accepts the vast majority of pistol suppressors and muzzle devices, including True Precision's own True-Lock compensator. When you're not running a device, the included Viton O-ring thread protector caps the muzzle and stays snug under recoil.

Does this barrel feed hollow points and defensive ammo reliably?

That's one of its strong points. True Precision widens and reworks the feed ramp over the OEM design and uses a fully supported SAAMI spec chamber, so it's built to run hollow points, factory defensive loads, cast lead, and reloads. That flexibility makes it a solid pick for a carry gun you actually trust.

Additional information

UPC

719104534419

Manufacturer

Manufacturer Part Number

TP-G43B-XT

Caliber/Gauge

9mm

Color

Silver

Length

3.90"

Model

Product Type

Barrel

Sights

No

Style

Threaded

Reviews

There are no reviews yet.

Be the first to review “True Precision TPG43BXT Threaded 9mm Barrel for Glock 43/43X”