Description
The Strike Industries King Comp is a dual-chamber muzzle device built to calm down a .308 without turning your rifle into a shoulder-punishing experience. It threads onto 5/8×24 barrels and works across 7.62 NATO, .308 Win, and .300 Blackout AR-platform builds, giving you a flatter, more controllable shooting feel whether you're running a precision rig or a shorter carbine setup.
What the King Comp Does on the Range
The magic here is in the geometry. That large dual-chamber design soaks up rearward recoil while the specifically angled gas ports redirect blast out to the sides to cut down the side concussion you'd normally feel from a bare brake. The net effect is a muzzle that stays put shot to shot, which means faster follow-ups and less time fighting your sight picture. The four serrated prongs at the crown add a degree of flash suppression too, so it pulls double duty as more of a hybrid than a straight comp or straight brake.
Build and Fit of the Strike Industries King Comp
Strike Industries machines this one from heavy-duty steel with a parkerized black finish, so it holds up to sustained fire and heat without any drama. It measures roughly 2.62 inches long with a 0.87 inch outside diameter and tips the scale right around 3.8 ounces, keeping things compact and light out at the end of your barrel. The six-tine crown that gives the King Comp its name isn't just for looks either, it can double as a standoff or a barbed wire cutter if you're the type who puts your gear through real work.
If you want a muzzle device that splits the difference between a compensator, a brake, and a bit of flash reduction without committing fully to any one, the King Comp is a solid pick for .30 caliber builds. It ships with a crush washer, so you've got what you need to time it and get out shooting.
Key Specifications
- Manufacturer: Strike Industries
- Model: King Comp
- Manufacturer Part Number: KINGCOMP30
- UPC: 708747544640
- Product Type: Compensator / Muzzle Brake Hybrid
- Caliber: .308 Win / 7.62 NATO / .300 BLK
- Thread Pattern: 5/8"-24 tpi
- Material: Steel
- Finish: Parkerized Black
- Length: 2.62 in
- Outside Diameter: 0.87 in
- Weight: 3.8 oz
- Design: Dual chamber with angled gas ports
What’s Included
- 1 x Strike Industries King Comp .308 muzzle device
- 1 x Crush washer
Frequently Asked Questions
Will the King Comp fit my .300 Blackout build?
Yes, the King Comp is rated for .308 Win, 7.62 NATO, and .300 Blackout as long as your barrel is threaded 5/8×24. Since it's a larger .30 caliber bore, the internals clear those rounds without issue. It's a popular choice for AR-10 and .300 BLK setups alike.
Is the King Comp a compensator or a muzzle brake?
It's really a hybrid of both. The dual-chamber design and side ports work like a brake to knock down felt recoil, while the porting also helps keep the muzzle flat like a compensator. The serrated prongs at the crown add a bit of flash reduction on top, so you get a little of everything in one device.
Does the King Comp come with a crush washer for timing?
Yes, it ships with a crush washer so you can index and time it correctly during install. Just thread it on, torque to your washer's crush spec, and you're good to go. Some folks prefer a peel washer or timing shims for finer adjustment, but the included crush washer gets most builds squared away.
How much does the King Comp cut down recoil and side blast?
The large dual-chamber design does a real job on rearward recoil, keeping the rifle steady for quicker follow-up shots. The angled gas ports are specifically designed to push concussion outward and away, which softens the side blast compared to a basic open brake. Expect a noticeably flatter, more controllable shooting feel on your .308.






Reviews
There are no reviews yet.