Description
Building out an AR-15 lower or swapping a worn-out receiver extension? The San Tan Tactical AR15 Enhanced Buffer Tube Kit gives you every piece needed to bolt a Mil-Spec stock assembly onto your lower receiver in one shot. It's a carbine-length, six-position setup finished in matte black, so it plays nice with the vast majority of collapsible AR-15 stocks out there.
What Goes Into the San Tan Tactical Enhanced Buffer Kit
The receiver extension is machined from 7075 T6 aluminum to Mil-Spec dimensions and wears a Type III, Class II hard coat anodized finish, which is the tougher of the two common anodizing grades and holds up better to abrasion over years of stock adjustment. San Tan drilled through drainage holes into the tube so water clears out fast if you ever run it wet or submerged. Inside you get a standard 3 oz carbine buffer and a carbine action spring made from high-tensile steel, the two parts that keep your bolt carrier cycling smooth and returning to battery.
The QD End Plate Sets This Buffer Tube Kit Apart
Where the enhanced version earns its name is the hardware. Both the castle nut and the quick detach end plate are machined from high carbon steel, heat treated for strength, and given a nitride finish that fights corrosion and wear. That QD end plate is the real upgrade here, giving you a built-in socket to clip a push-button QD sling swivel right at the rear of the receiver. No separate mount to buy, no drilling, just a clean attachment point for your two-point or single-point sling.
Installing the San Tan Tactical Buffer Tube Kit
Installation is a standard armorer's job. Slide the takedown detent and spring in, thread the end plate and castle nut on, torque the nut down and stake it, then drop in your spring and buffer before mounting your stock. A castle nut wrench and a set of properly indexed hands are all you really need. San Tan Tactical builds these in Fort Worth, Texas, and the fit and finish reflect that. It's a solid foundation for a fresh build or a worthwhile bump up from a bare-bones Mil-Spec kit.
Key Specifications
- Manufacturer: San Tan Tactical
- Manufacturer Part Number: STT-CBTK-E
- UPC: 680599034169
- Product Type: Buffer Tube Complete Assembly
- Platform: AR-15
- Configuration: Carbine, 6-Position
- Tube Material: 7075 T6 Aluminum
- Tube Finish: Type III, Class II Hard Coat Anodized
- Buffer Weight: 3 oz Carbine Buffer
- Spring: Carbine Action Spring, High-Tensile Steel
- Hardware: High Carbon Steel Castle Nut and QD End Plate, Nitride Finished
- End Plate: Quick Detach (QD)
- Stock Compatibility: Mil-Spec AR-15 Stocks
- Country of Origin: Made in USA (Fort Worth, Texas)
- Color: Black
What’s Included
- 6-Position Mil-Spec carbine buffer tube (receiver extension)
- 3 oz standard carbine buffer
- Carbine action spring (high-tensile steel)
- High carbon steel castle nut (lock ring)
- Quick detach (QD) receiver end plate
Frequently Asked Questions
What stocks will fit the San Tan Tactical Enhanced Buffer Tube Kit?
It's a six-position tube machined to Mil-Spec dimensions, so it works with the wide range of Mil-Spec collapsible AR-15 stocks on the market. If your stock is labeled Mil-Spec rather than commercial spec, you're good to go. Commercial stocks run a slightly larger diameter and won't seat correctly on this tube.
Does this kit include the buffer and spring, or just the tube?
The full kit comes with everything to mount a stock assembly onto your lower. That means the buffer tube, a 3 oz carbine buffer, the carbine action spring, the castle nut, and the QD end plate. You supply the stock itself and the takedown detent and spring if your lower doesn't already have them.
What makes this the enhanced version compared to a standard buffer kit?
The upgrade is in the hardware and the tube grade. You get a 7075 T6 aluminum tube with a tougher Type III hard coat anodized finish, plus a heat-treated high carbon steel castle nut and a QD end plate with a nitride coating. That QD end plate gives you a ready-made sling attachment point that a basic kit doesn't.
Do I need to stake the castle nut on the San Tan Tactical buffer tube kit?
Staking is the recommended practice for any Mil-Spec castle nut to keep it from backing off under recoil. Torque the nut to spec with a castle nut wrench, then stake it against the end plate notches. It's a quick step that keeps everything locked in place over thousands of rounds.




Reviews
There are no reviews yet.