Description
Anyone who has tried to sight in a thermal scope knows the real headache is not the rifle, it's finding something on the range that glows in the optic. A plain paper target reads as a flat, cold rectangle through thermal, which leaves you guessing where your point of aim really is. ATN built these targets to solve exactly that. Each one pairs a heat-reactive surface with an included heat source, so the aiming point shows up as a clear, hot signature the moment you look through your scope.
What Makes the ATN Thermal Targets Different
These are 16×16-inch cardboard targets printed with a grid layout, which is the part that earns its keep during a zero session. The grid gives you clean reference lines for making elevation and windage corrections instead of eyeballing it off a fuzzy blob. Once the heat source is activated, the contrast pops in the optic and you get a defined point of aim to work from. That combination of a visible heat signature plus a measured grid is what turns a frustrating afternoon into a quick job.
Getting the Most Out of Each Thermal Target
A few tips from folks who run these: the heat source has a working window before the warmth spreads across the board, so have your rifle set up and your scope ready before you activate it. Work efficiently and you'll get your shots and corrections done inside that window. The cardboard is light and disposable, which makes it easy to pack a couple in your range bag and set them up quickly.
The 3-pack gives you enough targets for multiple sessions or for zeroing more than one thermal setup. If you run a ThOR, a Mars, or any thermal optic and you're tired of improvising with warm rocks and hand warmers taped to boxes, this is a purpose-built shortcut that does the job.
Key Specifications
- Manufacturer: ATN
- Model: Thermal Target
- Manufacturer Part Number: ACMKIRTGPK
- UPC: 658175115168
- Quantity: 3 Targets
- Target Size: 16 x 16 inches
- Material: Cardboard
- Color: Brown
- Heat Source: Included
- Grid: Printed zeroing grid
- Mount Type: Standing
- Best For: Thermal scope zeroing and training
- Shipping Weight: 0.665 lbs
What’s Included
- 3 ATN cardboard thermal targets (16×16 in)
- Included heat source for each target
Frequently Asked Questions
How do the ATN Thermal Targets show up in a thermal scope?
Each target uses a heat-reactive surface combined with an included heat source that produces a bright, easy-to-read thermal signature. Once activated, the aiming point stands out sharply in your optic instead of reading as a cold, flat surface like plain paper would. That gives you a defined point of aim for zeroing and training.
What size are the ATN thermal targets and do they have a grid?
They measure 16 x 16 inches and feature a printed grid layout. The grid gives you reference lines for making precise elevation and windage adjustments, which speeds up the whole zeroing process and takes the guesswork out of your corrections.
How long does the heat source last?
The heat source has a working window, so you'll want to have your rifle and scope fully set up before you activate it. Get your shots and corrections done efficiently within that window for the best results. Since you get three targets in the pack, you have plenty for multiple sessions.
Will these work with any thermal scope?
Yes, these targets are built to work with thermal rifle scopes in general, not just one brand. They're a solid match for ATN optics like the ThOR line, but the heat signature reads clearly through any thermal setup used for sighting in and training.





Reviews
There are no reviews yet.