Description
For years, adding a weapon light to an AK meant tearing off your handguards and bolting on a railed replacement. The RS Regulate BM-2 skips all that. It's a compact clamp-on mount that grips your barrel and gives you a short 1913 Picatinny rail section up front, letting you keep your original furniture while still running a modern light or laser. If you love the classic red wood on a ZPAP M70 or a Yugo build, this is how you modernize without losing the look.
What the BM-2 Fits
This one is cut for AK-47 and Yugo-spec barrels with a 0.66-inch outside diameter. That barrel measurement matters, since RS Regulate also makes the BM-1 for thinner 0.59-inch AKM barrels. If you're running a Zastava ZPAP M70 or another Yugo-pattern rifle, the 0.66-inch BM-2 is the one you want. When in doubt, measure your barrel between the handguard and gas block before ordering.
Built to Take AK Abuse
AKs aren't gentle guns. The barrel and receiver flex under fire while that long-stroke piston slams back and forth, so anything hanging off the front needs to stay put. The BM-2 is machined from 6061-T6 aluminum with a hardcoat anodized matte black finish, and it clamps down using quality Allen screws that lock the whole thing in place. Reviewers running these mounts through hundreds of rounds report no loosening and no issues with the rail interface, which is exactly what you want from a light mount that lives out on the barrel.
Small Footprint, Real Flexibility
At roughly an inch and a half long and under an ounce, the BM-2 adds almost no weight or bulk to your rifle. The four-slot rail gives you enough real estate for most compact lights and lasers, and the near-360 degree clamp positioning means you can index the rail to the side, bottom, or wherever your setup calls for. Its low profile typically clears the cleaning rod too, so you keep your rifle intact and functional while running the gear you want.
Key Specifications
- Manufacturer: RS Regulate
- Model: BM-2 AK47/Yugo Spec Accessory Mount
- Manufacturer Part Number: BM-2
- UPC: 617395300303
- Barrel Fitment: AK-47 / Yugo-spec 0.66" outside diameter
- Rail Type: 1913 Picatinny, 4 slots
- Material: 6061-T6 aluminum
- Finish: Hardcoat anodized matte black
- Style: Clamp-on / Quick Detach
- Positioning: Near-360 degree adjustment
- Dimensions: 1.57 x 0.86 x 1.26 inches
- Weight: 0.8 oz
- Color: Black
What’s Included
- RS Regulate BM-2 barrel accessory mount
- Clamp hardware / mounting screws
Frequently Asked Questions
How do I know if the BM-2 fits my AK barrel?
The BM-2 is built for barrels with a 0.66-inch outside diameter, which covers AK-47 and Yugo-spec rifles like the Zastava ZPAP M70. RS Regulate makes a separate mount, the BM-1, for thinner 0.59-inch AKM barrels. If you're not sure, measure your barrel between the handguard and gas block before ordering to confirm the diameter.
Can I keep my wood furniture with the BM-2 mount?
Yes, that's the whole point of this design. The BM-2 clamps directly onto the barrel and gives you a Picatinny rail up front, so you never have to remove your original handguards to run a light or laser. It's a popular choice for folks who want to keep the classic look of their AK while still adding modern accessories.
Will the BM-2 hold up to the recoil of an AK?
It's machined from 6061-T6 aluminum and clamps down tight with Allen screws, so it stays locked in place even under the AK's rough recoil impulse. Users have run these mounts through hundreds of rounds without the clamp working loose or the rail interface failing. It's a proven, low-maintenance setup once it's torqued down properly.
What can I mount on the BM-2 rail?
The four-slot 1913 Picatinny rail accepts most compact weapon lights, lasers, and other Picatinny-compatible accessories. The near-360 degree positioning lets you index the rail to the side or bottom of the barrel to match your gear and grip. Because it's low profile, it typically clears the cleaning rod so your rifle stays fully functional.



Reviews
There are no reviews yet.