$103.99
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The factory trigger on a Savage Axis or Edge gets the job done, but it's rarely the reason anyone brags about their groups. That's where the Timney Model 633 earns its keep. This is a self-contained drop-in unit machined from case-hardened solid steel, EDM cut and CNC finished, then hand-assembled and tested the way Timney has been doing it since 1946. The result is a trigger that breaks clean instead of dragging through creep and mush.
Every bit of this trigger is user-adjustable. Pull weight tunes anywhere from 1.5 to 4 pounds, and it also dials in for sear engagement (that's the creep you feel before the break) and over-travel (the follow-through after). It ships factory calibrated right around 3 pounds, so you can shoot it out of the box or set it to your own preference. A lot of folks land somewhere in the 2.5 pound range and never look back. Adjustments are done with a 1/4 inch open-end wrench and the included 5/64 hex key, so you're not chasing down special tools.
No gunsmith required on this one. Pull the bolt, remove the C-clip and trigger pin, lift out the old trigger, drop the Timney in with its spring, and reinstall the pin and clip. Most people have it swapped and adjusted in a few minutes. It fits Savage Axis and Edge centerfire bolt guns, right or left handed, and the black finish keeps it looking factory clean.
A good trigger is one of the cheapest ways to make an entry-level rifle punch above its weight. Getting rid of the slack and inconsistent break tightens up your groups without touching the barrel or bedding. Owners routinely say it makes a budget Savage feel like a rifle costing several times more. If you shoot your Axis for hunting, plinking, or ringing steel, this is the upgrade that pays off every time you press the trigger.
Yes. This is a self-contained drop-in trigger that swaps in for the factory unit, and it fits Savage Axis and Edge centerfire bolt-action rifles in both right and left hand configurations. You pull the bolt, remove the trigger pin and C-clip, and drop the new one in. No gunsmith and no permanent modifications needed.
Pull weight is adjustable anywhere from 1.5 to 4 pounds. It comes calibrated from the factory at roughly 3 pounds, which is a great all-around setting. Many owners dial theirs down to around 2.5 pounds for a lighter, crisper feel.
Adjustment is simple with a 1/4 inch open-end wrench and the 5/64 hex key that comes in the box. The hex key handles pull weight and the safety screw, while the wrench and hex key together let you fine-tune creep. Loosen the lock nut, set the screw, and tighten it back down.
It's machined from solid steel, EDM cut and CNC finished, then case-hardened for a lifetime of trouble-free use. Every trigger is hand-assembled and individually tested. Timney has been setting the standard for aftermarket triggers since 1946, and this unit carries that same reputation.
| UPC | 081950633005 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 633 |
| Color | Black |
| Length | 7.9000 |
| Model | |
| Product Type | Trigger |
| Style | Adjustable |
You must be logged in to post a review.
Reviews
There are no reviews yet.