Description
The stock Tikka trigger has a solid reputation, but if you prefer the feel of a two-stage setup, this Timney is one of the easiest upgrades you can make to a T3, T3x, or T1x. It gives you a smooth, defined first stage that takes up the slack, then stacks against a firm wall before a crisp break that helps you call your shots and shrink your groups. Timney machines the internals from steel and finishes the shoe in that unmistakable black and orange, so it looks the part on the bench and holds up round after round.
Dialing In the Timney Tikka T3 Trigger
Out of the box, the first stage is set right around 8 ounces with the second stage at 1 pound, giving you a total pull near 1.5 pounds. Both stages are adjustable, so you can tune the first stage up toward a pound and the second stage up to about 2.5 pounds depending on how you like it. The unit is also adjustable for sear engagement (creep) and overtravel, and most of the pull-weight tuning is handled with a 5/64 hex wrench on the front of the housing.
Installing the Two-Stage Tikka Trigger
This is a true drop-in, no gunsmith required. Pull the barreled action from the stock, back out the single retaining screw, swap the old trigger for the Timney, snug it back down, and reassemble. You'll want a T-20 Torx and a 5mm Allen wrench for the job, and most folks have it done in a few minutes. One thing worth knowing before you order: the Timney uses a standard safety and does not retain the factory bolt-lock feature, so the bolt can be worked with the safety engaged. For range and match use that's a non-issue, and plenty of hunters run it happily too, but it's good to know going in.
Who the 430 Trigger Suits
Precision shooters, long-range competitors, and hunters chasing a better break all gravitate toward this one. It's hand-assembled, tested, and calibrated for the Tikka platform before it leaves the factory, and it carries Timney's lifetime warranty. Made in the USA.
Key Specifications
- Manufacturer: Timney
- Manufacturer Part Number: 430
- UPC: 081950430000
- Model: 1.5-4 lbs Pull Weight
- Trigger Type: Two-Stage
- First Stage Pull Weight: 8 oz (adjustable to 1 lb)
- Second Stage Pull Weight: 1 lb (adjustable to 2.5 lbs)
- Total Pull Weight: Approx. 1.5 lbs from factory
- Adjustable For: Sear engagement, overtravel, pull weight
- Housing/Construction: Steel internals with aluminum housing
- Trigger Shoe: Curved
- Finish: Black/Orange
- Compatibility: Tikka T3, T3x, T1x (also fits Sako Quad)
- Length: 7.85 in
- Origin: Made in USA
- Warranty: Lifetime
What’s Included
- Timney two-stage trigger for Tikka T3/T3x (No. 430)
- Installation instructions
Frequently Asked Questions
Will the Timney 430 trigger fit my Tikka T3x or T1x?
Yes. This trigger is built for the Tikka T3 and is also compatible with the T3x and T1x. It has even been reported as a straight drop-in for the Sako Quad, giving those owners a two-stage option as well.
Do I need a gunsmith to install the Timney Tikka T3 trigger?
No, it's a true drop-in and most people handle it at home in a few minutes. You'll pull the barreled action from the stock, remove the single retaining screw, swap in the Timney, and reassemble. A T-20 Torx and a 5mm Allen wrench cover the install, with a 5/64 hex wrench for any pull-weight tuning.
How light can I set the pull on this two-stage trigger?
From the factory it's calibrated to roughly 8 ounces on the first stage and 1 pound on the second, for about 1.5 pounds total. You can adjust the first stage up toward a pound and the second stage up to around 2.5 pounds, and it's also tunable for creep and overtravel to fine-tune the feel.
Does this trigger keep the factory bolt-lock safety?
No. The Timney uses a standard safety and does not retain the factory bolt-lock feature, so the bolt can be cycled with the safety engaged. That's a non-issue on the range or in competition, though hunters who like the bolt locked while moving through cover should keep it in mind.







Reviews
There are no reviews yet.