Description
The Streamlight ProTac Rail Mount HL-X Laser USB packs a serious punch of illumination and a red aiming laser into one compact housing built for rifles, carbines, and other long guns. The C4 white LED cranks out 1,000 lumens on high with a beam that reaches roughly 270 meters, and it drops down to a 60-lumen low mode when you need to stretch runtime and preserve your night vision. That co-located red laser gives you a fast point of aim for close-quarters work, and it's adjustable for windage and elevation using the included hex wrench.
What Sets the ProTac HL-X Laser Apart
The rail grabber is the clever part here. It's separate from the light body, so the clamp can rotate within the mount while holding your windage and elevation zero, meaning you can position the unit exactly where you want on the rail without throwing off your laser. It attaches to any MIL-STD-1913 Picatinny rail with a thumbscrew, and the one-handed on/off and tighten interface keeps your hands clear of the muzzle during install and removal.
Power and Programming on the HL-X Laser USB
Multi-fuel is the name of the game. This model ships with Streamlight's SL-B26 18650 rechargeable battery that charges right through an integrated USB port, and it'll also run on two CR123A lithium cells in a pinch. On the rechargeable pack you're looking at around 1.25 hours on high and roughly 23 hours on low. TEN-TAP programming lets you pick from three switch setups: high/strobe, high only, or low/high, so the light behaves the way you shoot.
Built to Take a Beating
The body is 6000-series machined aircraft aluminum with a Type II Mil-Spec anodized finish and a gasket-sealed borofloat glass lens. It's IPX4 water-resistant, impact tested, and extensively live-fire proven, and it runs on the same double-switch flexibility Streamlight is known for: a push-button tail cap or the included remote pressure switch. Backed by Streamlight's limited lifetime warranty, it's a dependable all-in-one setup for a Picatinny-equipped long gun.
Key Specifications
- Manufacturer: Streamlight
- Model: ProTac Rail Mount HL-X Laser USB
- Manufacturer Part Number: 88090
- UPC: 080926880900
- High Output: 1,000 lumens / 270m beam / 18,200 candela
- Low Output: 60 lumens / 66m beam
- Laser: Integrated red laser, less than 5mW (Class 3R), windage/elevation adjustable
- Battery: One SL-B26 18650 USB rechargeable (included) or two CR123A lithium
- Runtime (High/Low): 1.25 hrs high / 23 hrs low on SL-B26
- Programming: TEN-TAP: high/strobe, high only, low/high
- Switching: Push-button tail cap and remote pressure switch
- Housing: 6000-series machined aircraft aluminum, Type II Mil-Spec anodized
- Lens: Borofloat glass, gasket-sealed
- Water/Impact Rating: IPX4 water-resistant, impact tested
- Length: 6.56 in
- Weight: 10.8 oz (with SL-B26 battery)
- Mount: MIL-STD-1913 Picatinny rail clamp
- Color: Black Anodized
What’s Included
- ProTac Rail Mount HL-X Laser light with integrated mount
- Push-button tail switch
- Remote pressure switch
- Remote retaining clips
- SL-B26 18650 USB rechargeable battery
- USB charging cord
- Double-sided tape
- Zip ties
- Mounting hardware
Frequently Asked Questions
Does the ProTac Rail Mount HL-X Laser come with a rechargeable battery?
Yes, this USB model ships with Streamlight's SL-B26 18650 protected Li-Ion rechargeable battery and a USB charging cord. The battery charges through an integrated port, so you don't need a separate cradle. If you ever run it dry, you can also drop in two CR123A lithium cells thanks to the multi-fuel design.
Can you adjust the laser to zero it with your rifle?
You can. The red laser is adjustable for windage and elevation using the included hex wrench, letting you dial it in to match your point of impact. Keep in mind that a laser has one true zero distance where it lines up with the bullet path, so pick the range that fits how you use the gun.
Will the HL-X Laser hold its zero if I reposition it on the rail?
That's one of the standout features. The rail grabber is separate from the light body, so the clamp rotates within the mount while keeping your windage and elevation settings intact. That means you can move it to a different spot on the Picatinny rail without re-zeroing the laser.
What does TEN-TAP programming actually do?
TEN-TAP lets you customize how the switch cycles between modes. You can choose from three programs: high/strobe, high only, or low/high, depending on whether you want quick access to a strobe, a simple single-output setup, or a low-then-high progression. It's a handy way to make the light behave the way you shoot.





Reviews
There are no reviews yet.