Description
Harris has been the name in bipods for decades, and the LM1A2 is the model you reach for when you want a lightweight, dependable rest that just works. It clamps straight to a standard sling swivel stud on a bolt-action or AR-style forend, so there's no extra hardware to fuss with. At around 12 ounces it barely changes the balance of your rifle, but the heat-treated steel and hard alloy build feels every bit as solid as its reputation suggests.
What the LM1A2 Notched Legs Do for You
This is the notched-leg version, which is what most folks are after. Each leg is spring-loaded, so a quick press of the release button and they kick out to full height. From there the legs index in 1-inch increments anywhere between 9 and 13 inches, locking into place so you get the same height every time you deploy. Thumb screws on each leg let you fine-tune and hold your setting, and the legs retract back under spring tension when you're done. That notched system is the big draw here since you can drop into a position and set your height without leaving the gun.
Running the Harris LM1A2 in the Field
The 9-to-13-inch range covers prone work and bench shooting nicely, and it gives you enough leg to settle in over grass, gravel, or uneven dirt. Hard rubber leg caps keep the feet planted and cut down on slipping. When you're on the move, the whole thing folds forward toward the muzzle and the spring returns hold it there out of the way, so it doesn't snag when you sling up or shoot offhand.
Why the LM1A2 Earns Its Spot
This is a solid-base model, meaning the legs don't cant or tilt side to side like the swivel S-series does. If you want a straightforward, no-nonsense rest that stays put and delivers a stable platform shot after shot, the LM1A2 is a proven pick. It's 100% made in the USA and finished in a durable black anodized coating that shrugs off weather and wear.
Key Specifications
- Manufacturer: Harris Engineering
- Model: LM Series 1A2-LM
- Manufacturer Part Number: 1A2-LM
- UPC: 051156012119
- Height Range: 9 to 13 inches
- Leg Adjustment: Notched, 1-inch increments
- Base Type: Solid base, non-swivel
- Deployment: Spring-loaded, push-button release
- Weight: Approximately 12 oz
- Material: Heat-treated steel and hard alloys
- Finish: Black anodized
- Feet: Hard rubber leg caps
- Mounting: Sling swivel / Q.D. stud
- Color: Black
- Country of Origin: Made in USA
What’s Included
- Harris LM1A2 9-13 inch notched-leg bipod
- Sling swivel stud clamp mount
Frequently Asked Questions
What kind of rifle will the Harris LM1A2 fit?
The LM1A2 clamps to any rifle that has a standard sling swivel stud on the forend, which covers most bolt-action rifles with a conventional stock. It also works on AR-style setups that have a sling stud up front. No extra adapters are needed since the clamp attaches directly to the stud.
What does the notched-leg feature on the LM1A2 do?
The notched legs let you lock the height in at 1-inch increments anywhere from 9 to 13 inches. Press the release button and the spring-loaded legs kick out to full height, then you index them down to the notch you want. It makes for fast, repeatable height changes without having to look at the bipod or leave your shooting position.
Does the LM1A2 bipod cant or tilt side to side?
No, the LM1A2 is a solid-base model, so the legs stay fixed and do not swivel or tilt. If you want side-to-side cant to level on uneven ground, you'd be looking at Harris's swivel S-series instead. The solid base trades that adjustment for a very stable, planted platform.
How much does the Harris LM1A2 weigh?
It comes in right around 12 ounces, which makes it one of the lighter bipods you can bolt onto a rifle. Despite the light weight, it's built from heat-treated steel and hard alloys, so it holds up to real-world use. You won't notice much change in your rifle's balance carrying it in the field.





Reviews
There are no reviews yet.