Description
Lead buildup is one of those problems that sneaks up on you. You keep running patches and brushing away, and the groups still open up because there's leading packed into the last few inches of the barrel. Shooters Choice Lead Remover is built for exactly that headache. It's a non-abrasive solvent that goes after lead and metal fouling from handguns, rifles, and shotguns, dissolving the deposits instead of scrubbing your bore raw to get them out.
How the Shooters Choice Lead Remover Actually Works
The process is about as simple as gun cleaning gets. Swab the bore, let the solvent sit for a few minutes so it can break down the fouling, then run a tight brush and patches through. Folks who've fought heavy leading and given up on brute force have been genuinely surprised at how much comes out on the patch after just letting it soak. For barrels that have been neglected or shot hard with cast lead loads, a second application takes care of what the first one loosened. Because it's non-abrasive, you're not wearing on the rifling or the bore surface to get results.
Why the 4 oz Tin Belongs in Your Cleaning Kit
Four ounces goes a long way when you only need enough to wet a patch or two per session. The tin is compact enough for a range bag or bench drawer, and since it handles pistols, long guns, and shotguns, you're not buying a separate product for each. It pairs naturally with a copper solvent and a good lubricant if you're building out a full cleaning setup.
Shooters Choice has spent decades on gun care solvents, and this one is proudly made in the USA. If you shoot a lot of cast or plated lead and want your accuracy back without beating up your barrel, this tin is a straightforward, no-drama fix that does what it says.
Key Specifications
- Manufacturer: Shooters Choice
- Manufacturer Part Number: SHF-LRS04
- UPC: 027784000026
- Product Type: Lead Remover Solvent
- Size: 4 oz
- Container: Metal Tin
- Delivery Method: Liquid
- Non-Abrasive: Yes
- Aerosol: No
- Compatible Firearms: Handguns, Rifles, Shotguns
- Country of Origin: Made in the USA
- Quantity: 1
What’s Included
- One 4 oz tin of Shooters Choice Lead Remover
Frequently Asked Questions
How do I use Shooters Choice Lead Remover for the best results?
Swab the bore with the solvent, let it sit for a few minutes so it can break down the lead, then run a tight-fitting brush followed by clean patches. Heavy or long-neglected leading may take a second application to fully clear. Letting it soak does most of the work, so there's no need to scrub yourself out of breath.
Will the Shooters Choice Lead Remover harm my barrel or rifling?
No. This is a non-abrasive formula, which means it dissolves lead and metal fouling chemically rather than grinding it out. That makes it safe for regular bore maintenance without wearing on the rifling or bore surface.
Can I use this Lead Remover on handguns, rifles, and shotguns?
Yes, it's formulated to remove lead fouling from all three. That's part of why it's handy to keep around since one tin covers your pistols, long guns, and shotguns. It's a good match for anyone shooting cast or plated lead loads that tend to leave deposits behind.
Does the Shooters Choice Lead Remover remove copper fouling too?
This one is specifically built for lead and metal fouling, not copper. If you're shooting jacketed rounds and dealing with copper buildup, you'll want to pair it with a dedicated copper solvent. Shooters Choice makes a separate copper remover that works alongside this for a complete cleaning routine.




Reviews
There are no reviews yet.