0
0

Otis Ripcord .308 Cal / 7.62mm One-Pass Bore Cleaner, 36 in

UPC: 014895000571

$12.99

12 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Otis Ripcord is about as simple as bore cleaning gets. You feed it in at the breech, pull it through to the muzzle, and it drags carbon and fouling right out with it. No rods to assemble, no gravity feed, no fuss. This .308 caliber version is sized for your 7.62mm and .30 cal rifles, and at 36 inches it gives you plenty of length to run a full-size barrel start to finish.

How the Ripcord Cleans in One Pull

What makes this thing work is the rigid, helix-shaped rubber core wrapped in braided Nomex fibers. The helix follows the rifling and keeps the cleaning surface pressed firmly against the bore, so you get full 360-degree contact all the way through. The Nomex does double duty, acting like a brush to loosen fouling and a patch to trap and carry it out. You get 10 inches of aggressive cleaning surface doing the work on every pull.

Range-Ready and Field-Tough

The braided Nomex surface handles heat up to 700 degrees, which means you can run the Ripcord while the barrel is still hot from a range session. That warm-barrel cleaning actually helps fouling come loose easier. Run it dry for a quick wipe-through, or add a few drops of solvent to the front end when you want to dig deeper into stubborn carbon and copper buildup. It rolls up small enough to toss in a range bag or truck kit, so it's always within reach.

Building Out Your Otis Kit

Both ends are fitted with 8-32 brass threads, so the Ripcord ties right into the rest of the Otis cleaning lineup. Thread on a bore brush for a more thorough scrub, and use the included Bore Reflector+ as a handy pull handle when you need extra grip. If you already run Otis gear, this drops right into your setup. If you don't, it's a solid standalone tool that keeps your maintenance fast and portable.

Key Specifications

  • Manufacturer: Otis Technology
  • Model: Ripcord
  • Manufacturer Part Number: FG-RC-330
  • UPC: 014895000571
  • Product Type: Pull-Through Bore Cleaner
  • Caliber: .308 Cal / 7.62mm (.30 cal variants)
  • Style: Rifle
  • Overall Length: 36 in
  • Cleaning Surface: 10 in
  • Core: Molded rubberized helix
  • Cleaning Surface Material: Braided Nomex
  • Heat Resistance: Up to 700 degrees F
  • Thread Pattern: 8-32
  • Coverage: 360-degree, breech-to-muzzle
  • Country of Origin: Made in USA
  • Quantity: 1

What’s Included

  • Otis Ripcord .308 cal / 7.62mm one-pass bore cleaner (36 in)
  • Bore Reflector+ chamber flag with 8-32 threaded end that doubles as a pull handle

Frequently Asked Questions

Do I need to use solvent with the Otis Ripcord?

No, you can run it dry for a quick clean, especially right after shooting while the barrel is still warm. When you want a deeper clean on heavier carbon or copper fouling, add a few drops of solvent to the front end before pulling it through. Running it warm at the range tends to make fouling come loose more easily either way.

What calibers does this Ripcord work with?

This model is built for .308 cal and 7.62mm barrels, and it also works across other .30 cal variants like .30-06, .30-30, and 300 BLK. The molded core is sized to press the Nomex against the rifling in that bore diameter for full 360-degree contact. If you shoot multiple calibers, Otis makes caliber-specific Ripcords for each.

Can I attach a bore brush to the Ripcord?

Yes. Both ends have 8-32 brass threads that fit Otis cleaning components, so you can thread on a bore brush for a more thorough scrub. Those same threads let the included Bore Reflector+ attach as a pull handle for better grip when you're working it through the barrel.

How is this different from a traditional cleaning rod?

The Ripcord cleans in a single breech-to-muzzle pull with no rod assembly and no gravity feed required. The flexible helix core and braided fibers do the scrubbing and fouling capture in one pass, which saves time over the patch-and-rod routine. It also rolls up small, so it's far easier to carry in a range bag or truck kit.

Additional information

UPC

014895000571

Manufacturer

Manufacturer Part Number

FG-RC-330

Caliber/Gauge

.30 Caliber

Length

36"

Model

Product Type

Bore Cleaner

Quantity

1

Shipping Weight

0.1313

Style

Rifle

Thread Pattern

8-32"

Reviews

There are no reviews yet.

Be the first to review “Otis Ripcord .308 Cal / 7.62mm One-Pass Bore Cleaner, 36 in”