Description
There are a lot of ARs out there, and then there is what Radian builds. The Model 1 starts life as billet machined 7075-T6 aluminum uppers and lowers, gets a match grade 416R stainless steel barrel with a polished crown and feed ramps, and then a trained gunsmith assembles the whole rifle by hand, test fires it, cleans it, and signs off before it leaves the shop. Radian backs that work with a sub-MOA accuracy guarantee using Black Hills match grade ammunition, which is not something you see on many factory rifles.
Why This 14.5 Inch Model 1 Makes Sense
This version pairs a 14.5 inch barrel with a pinned and welded Dead Air flash hider and suppressor mount, giving you a shorter, handier package than a standard carbine while keeping things simple on the paperwork side. The .223 Wylde chamber is the smart middle ground, letting you run 5.56 NATO or .223 Rem and squeeze better accuracy out of both, and the 1:8 twist stabilizes everything from light varmint loads up to 77 grain match bullets. A mid-length gas system keeps recoil soft, and the Raptor-SD charging handle is designed to vent gas away from your face when you hang a can on the front.
Ambidextrous the Way Radian Does It
Lefties get treated like first-class citizens here. The A-DAC lower gives you ambidextrous dual-action controls including a right-side bolt hold open, the Talon safety selector works from either side and can be set to a 45 or 90 degree throw, and the Raptor-SD charging handle pulls cleanly with either hand. Add the crisp Radian Vertex trigger, a flared magwell, and Magpul MOE furniture, and the whole rifle just runs the way you want it to.
The upper, lower, and extended M-LOK handguard are all Cerakoted in the same batch, so the black finish matches perfectly from muzzle to buttstock. At around 6.5 pounds bare, this is a rifle that carries easy, shoots flat, and looks the part while doing it. Radian guarantees it for life, and once you handle one, you will understand why they can.
Key Specifications
- Manufacturer: Radian Weapons
- Model: Model 1
- Manufacturer Part Number: R0037
- UPC: 817093020934
- Caliber: .223 Wylde (accepts .223 Rem and 5.56 NATO)
- Action: Semi-Auto, Direct Impingement
- Barrel: 14.5 in Match Grade 416R Stainless Steel, Polished Crown and Feed Ramps
- Muzzle Device: Dead Air Flash Hider/Suppressor Mount, Pinned and Welded (16 in OAL)
- Twist Rate: 1:8
- Gas System: Mid-Length
- Receivers: Billet Machined 7075-T6 Aluminum, Black Cerakote
- Handguard: Extended Free Float Aluminum with Magpul M-LOK
- Charging Handle: Radian Raptor-SD Ambidextrous, Suppressor-Optimized
- Safety: Radian Talon Ambidextrous 45/90 Selector
- Capacity: 30+1
- Weight: Approx. 6.5 lbs
What’s Included
- Radian Model 1 rifle
- One 30-round magazine
- Cable locking device
- Owner's manual
Frequently Asked Questions
Does the Radian Model 1 come with a 16 inch overall barrel length?
Yes. The 14.5 inch barrel has the Dead Air flash hider and suppressor mount permanently pinned and welded, bringing the total barrel length to 16 inches. You get the shorter, quicker-handling feel of a 14.5 inch setup in a standard rifle configuration.
Can I shoot both .223 Rem and 5.56 NATO through the Model 1?
You can. The .223 Wylde chamber is a hybrid design that safely handles 5.56 NATO pressures while holding tighter tolerances than a standard 5.56 chamber, so it tends to shoot .223 match loads more accurately too. The 1:8 twist handles bullet weights from roughly 50 to 77 grains well.
Is the Radian Model 1 suppressor ready?
Very much so. The pinned Dead Air muzzle device doubles as a suppressor mount for compatible cans, and the Raptor-SD charging handle is designed specifically to redirect gas blowback away from your face when shooting suppressed. It is one of the more thoughtfully set up suppressor host rifles on the market.
Does this rifle come with sights or an optic?
No, the Model 1 ships optic ready with a full-length Picatinny top rail and no iron sights. Most owners pair it with a red dot, LPVO, or backup irons depending on how they plan to use it. The M-LOK handguard gives you plenty of room for lights, lasers, and other accessories.




Reviews
There are no reviews yet.