Description
When your primary optic gives out on you, you want a backup that just works. The Magpul MBUS Front Sight Gen II is the folding polymer sight that earned its reputation as the go-to iron up front, built for the AR-15/M16 platform and ready to clamp onto most any MIL-STD-1913 Picatinny rail. It sits at standard A2 height-over-bore, so it lines up naturally with your existing rear sight and drops right into a lower 1/3 co-witness with most red dots.
What Makes the Gen II MBUS Tick
The whole thing is spring-loaded and ambidextrous, so you can pop it up by pushing the levers on either side or just pressing the top. Detent and spring pressure hold the post locked upright, but if the sight takes a knock it folds down instead of snapping. Protective wings flank the A2 front post to keep it safe when the rifle gets tossed in a case or dragged through the brush. Folded down it only stands about half an inch off the rail, keeping a low profile that won't snag when you're moving.
Dialing In the MBUS Front Sight
Elevation adjustment on the spring-locking A2 post gives you roughly 1.6 MOA per click at a 14.5-inch sight radius. It ships with an elevation tool, though any standard A2 front sight tool you already own will do the job just fine. Once you get it sighted in, folks consistently report it holds zero no matter how rough they run the rifle.
Where the Gray MBUS Earns Its Keep
Made in the USA from impact-resistant polymer, this sight shrugs off recoil, weather, and general operational abuse while barely adding any weight to your build. One thing worth knowing up front: the front MBUS needs to mount on a railed forend that sits on the same plane as your receiver rail, so it isn't meant for a railed gas block or MOE handguards. Pair it with the matching MBUS rear and you've got a lightweight, dependable set of irons backing up your optic for years to come.
Key Specifications
- Manufacturer: Magpul Industries
- Manufacturer Part Number: MAG247-GRY
- Model: MBUS Gen II
- UPC: 873750011486
- Color: Gray
- Product Type: Front Sight
- Style: Folding Back-Up Sight
- Material: Impact-Resistant Polymer
- Mount Type: MIL-STD-1913 Picatinny / STANAG 4694
- Platform: AR-15 / M16
- Elevation Adjustment: ~1.6 MOA per click at 14.5" radius
- Height Above Rail (Stowed): ~0.51 in
- Length Stowed / Deployed: 2.6 in / 1.5 in
- Weight w/ Hardware: ~1.2 oz
- Country of Origin: USA
What’s Included
- Magpul MBUS Gen II Front Sight (Gray)
- Elevation adjustment tool
- Mounting hardware
Frequently Asked Questions
Will the MBUS front sight co-witness with my red dot?
Yes. Since it sits at standard A2 height-over-bore, the MBUS front lines up for a lower 1/3 co-witness with most red dot optics. Owners regularly run it alongside sights like the Sig Romeo 5 with no trouble. Just make sure your rear sight matches the same height plane.
Can I mount the MBUS front sight on a railed gas block?
No, that's not recommended. The front MBUS should be mounted on a railed forend that sits on the same plane as your receiver rail, and the excess heat from a gas block can be a problem for the polymer. For the same reason it isn't compatible with MOE handguards.
How do I adjust elevation on the Gen II MBUS?
You adjust the spring-locking A2 front post using the included elevation tool, though any standard aftermarket A2 front sight tool will work too. Each click moves you roughly 1.6 MOA at a 14.5-inch sight radius. Once it's dialed in, it stays put through hard use.
Is the polymer MBUS durable enough to rely on?
For civilian and range use, absolutely. The impact-resistant polymer shrugs off recoil, weather, and rough handling, and longtime users report no cracking or spring issues over years of use. If a folded sight takes a hard knock, it flexes down rather than breaking.






Reviews
There are no reviews yet.