Description
When you run a magnified optic, a backup sight isn't optional gear, it's insurance. The Magpul MBUS Pro Offset Front Sight mounts at a 45-degree angle to the right-hand side of your rail, so a quick rotation of the rifle puts you on target with irons the moment your primary optic fails or a target gets too close for magnification. It's part of Magpul's proven MBUS Pro line, and it carries the same no-nonsense build quality the platform is known for.
Built Like the Rest of the MBUS Pro Family
This is an all-steel sight, case hardened and finished with a Melonite QPQ salt bath nitride treatment for serious resistance to wear and corrosion. That means it holds up to weather, hard use, and the kind of abuse a working rifle sees. The MBUS Pro Offset Front deploys with positive detents in both the up and down positions, plus a detent on the elevation knob, so it locks where you leave it and won't drift on you.
Zeroing and Fit on the MBUS Pro Offset Front
Elevation adjustment is tool-less thanks to a ribbed elevation wheel, giving you roughly 1 MOA per click on a 14.5-inch sight radius. It mounts to any MIL-STD-1913 Picatinny or STANAG 4694 rail, including receiver-height gas blocks, and sits at standard AR height over bore when deployed. Stowed, it stays low at around 0.18 inches above the rail and 1.9 inches long, with a snag-free profile that keeps your rifle's silhouette clean.
This front sight is designed to pair with the MBUS Pro Offset Rear (MAG526) for a complete offset iron setup. It comes in at just 1.8 ounces with hardware, so it adds almost nothing to your build while giving you a dependable fallback. Made in the USA and built to Magpul's standards, it's the kind of piece you mount once and stop thinking about until the day you need it.
Key Specifications
- Manufacturer: Magpul Industries
- Model: MBUS Pro Offset
- Manufacturer Part Number: MAG525-BLK
- UPC: 873750000329
- Product Type: Flip-Up Front Sight
- Style: Adjustable
- Color: Black
- Construction: All-Steel, Case Hardened
- Finish: Melonite QPQ Salt Bath Nitride
- Offset Angle: 45 Degrees, Right-Hand Side
- Mounting: MIL-STD-1913 Picatinny / STANAG 4694
- Elevation Adjustment: ~1 MOA per click (14.5" sight radius)
- Height Above Rail (Stowed): ~0.18 in
- Length (Stowed): 1.9 in
- Weight w/ Hardware: 1.8 oz
- Made In: USA
What’s Included
- Magpul MBUS Pro Offset Front Sight (MAG525-BLK)
- Mounting hardware
- Installation instructions
Frequently Asked Questions
What does the MBUS Pro Offset Front Sight pair with for a full iron setup?
It's designed to run alongside the MBUS Pro Offset Rear Sight (MAG526) to give you a complete 45-degree offset iron sighting system. You mount both on your Picatinny rail and rotate the rifle a quarter turn to transition from your optic to irons. The front sight can be used on its own, but the matched rear is what makes it a fully-featured backup setup.
Will the MBUS Pro Offset Front Sight fit my rail?
It mounts to any MIL-STD-1913 Picatinny or STANAG 4694 rail, including receiver-height gas blocks. That covers the vast majority of modern AR-15 handguards and flat-top uppers. As long as you've got a standard Picatinny surface up front, it'll clamp on.
Do I need tools to zero the front post?
No tools required for elevation. The ribbed elevation wheel adjusts by hand, giving you roughly 1 MOA per click on a 14.5-inch sight radius, so you can fine-tune your zero right at the range. The detented knob holds its setting once you've dialed it in.
Is the MBUS Pro Offset Front Sight steel or polymer?
This is the Pro version, which is all-steel construction, case hardened and finished with a Melonite QPQ nitride treatment for corrosion and wear resistance. That's the main difference from the standard polymer MBUS line. It's a heavier-duty build meant for hard use, though it still only adds about 1.8 ounces to your rifle.





Reviews
There are no reviews yet.