Description
If you have ever fumbled the front sight in low light or squinted trying to sort three dots apart, the XS F8 was built to fix exactly that. It takes the speed of XS's Big Dot heritage and blends it with a cleaner notch-and-post layout. The result is a large 0.160-inch front post ringed with a high-contrast orange Ember glow dot, paired with a wide 0.190-inch rear notch so your eye locks onto the front sight instantly. Green tritium sits in both the front and rear, glowing on its own with no batteries to worry about.
How the F8 Figure-8 Sight Picture Works
Instead of lining up a front dot between two rear dots, you simply stack the front dot on top of the single rear dot to form a figure-8. It is quick to learn and hard to get wrong under stress. The orange photoluminescent ring soaks up ambient light and glows during that in-between dusk period before the tritium fully takes over, so you are covered across the whole lighting range. The rear notch has a rounded base that pulls your focus to the top edges for clean alignment, plus an overhang up top that knocks down glare from bright light sources.
Built Tough and Ready for a Red Dot
XS machines the F8 from solid steel bar stock in their own in-house shop, so these hold zero and shrug off recoil and rough handling far better than the plastic factory sights they replace. The flat forward face on the rear gives you a ledge for one-handed slide manipulations against a belt or holster. Worth knowing, these sit taller than most traditional irons, which makes them handy as backup irons that can co-witness with certain reflex sights.
Fitment for Your S&W M&P
This set fits the S&W M&P Full Size and Compact, including M&P M2.0 Full Size and Compact models, in 9mm, .40 S&W, and .45 ACP. It will not fit M&P Rimfire models. Install is straightforward with a sight pusher, or a hammer and brass punch if you are careful, and XS backs the set with a 10-year warranty.
Key Specifications
- Manufacturer: XS Sights
- Model: F8
- Manufacturer Part Number: SW-F027P-5
- UPC: 647533045780
- Front Sight: Green tritium with high-visibility orange photoluminescent ring
- Rear Sight: Green tritium, wide notch
- Sight Picture: Figure-8, 2-dot alignment
- Front Post Width: 0.160 in
- Rear Notch Width: 0.190 in
- Housing Material: CNC-machined steel bar stock
- Finish: Matte black
- Fitment: S&W M&P Full Size & Compact, M&P M2.0 Full & Compact (9mm, .40 S&W, .45 ACP)
- Warranty: 10-Year Manufacturer Warranty
- Country of Origin: USA (Fort Worth, TX)
- Shipping Weight: 0.135 lb
What’s Included
- XS F8 front night sight
- XS F8 rear night sight
- Installation instructions
Frequently Asked Questions
Will the XS F8 fit my S&W M&P M2.0?
Yes. This set is made for the S&W M&P Full Size and Compact, including the M2.0 Full Size and Compact versions in 9mm, .40 S&W, and .45 ACP. The one exception is the M&P Rimfire models, which it will not fit.
What is the figure-8 sight picture and is there a learning curve?
The F8 uses a two-dot system where you stack the large front dot directly on top of the single rear dot to form a figure-8. It removes the front-versus-rear confusion you can get with three dots and speeds up alignment. If you are coming from a standard three-dot M&P setup, expect a short adjustment period before it becomes second nature.
Do the tritium dots need batteries or charging?
No batteries required. The green tritium in the front and rear glows on its own around the clock. The orange ring on the front is photoluminescent, so it charges from ambient light and glows during the dusk window before the tritium fully takes over.
Can the F8 work as backup sights with a red dot?
They can. The F8 sits taller than most traditional irons, which lets it serve as backup iron sights and co-witness with certain reflex optics on factory-machined slides. Just double-check clearance and cut height for your specific optic and slide before ordering.





Reviews
There are no reviews yet.