$18.99
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Hi-Viz TO200 Two-In-One is the easy answer for anyone who has lost the front bead in low light or watched their eyes turn a black post into a fuzzy blob. It attaches to your vent rib shotgun barrel with a strong magnetic base, no drilling, tapping, or trip to the gunsmith needed. It fits ribs measuring .171" to .265" (11/64" to 17/64", or 4.2mm to 6.7mm), which covers a good chunk of narrow-rib guns from Remington, Beretta, Browning, Benelli, and more. If you are not sure of your rib width, just measure across the rib right behind the bead and match it to that range.
The clever part is right there in the name. Green and orange LitePipes are built into the same sight, so to swap colors you simply spin the sight around on the rib and reattach it. Green tends to pop in flat, overcast conditions while orange stands out against green backgrounds and brush, so having both on tap is genuinely useful across seasons and settings. The LitePipe gathers and concentrates whatever light is around to give you a bright, glowing aiming point that helps you get on target faster.
The TO200 ships with two replaceable LitePipe styles, a round pipe and a triangular pipe, each carrying both green and orange. The round pipe reads a lot like a traditional bead if that is what you are used to, while the triangle gives you a slightly different reference point. LitePipes are a wear item and can be swapped out down the road if one ever gets dinged up.
Worth noting is that magnetic sights work best on standard barrels that do not slam back into the receiver, and shooters running ported barrels sometimes secure theirs with a dab of silicone for extra insurance during hard transport. Hi-Viz backs the sight itself with a limited lifetime warranty against manufacturing defects.
The sight uses a magnetic base that grabs onto your shotgun's vent rib right where the front bead sits. There is no drilling, tapping, or gunsmithing involved, so you can install it in seconds and pull it off just as easily. That makes it a great option if you want a brighter sight picture without permanently altering the gun.
This model fits ribs measuring .171" to .265" (11/64" to 17/64", or 4.2mm to 6.7mm), which lands in the narrow-rib range. Measure across the rib just behind the bead to confirm it falls in that window. It has been listed as compatible with narrow-rib guns from Remington, Beretta, Browning, Benelli, and Sig, though checking Hi-Viz's shotgun application chart is the surest way to match your exact model.
Because both colors are built into the same sight, you just lift it off, turn it around on the rib, and set it back down. Green tends to show up well on flat, overcast days while orange stands out against green backgrounds and brush. You also get both a round and a triangular pipe in the box so you can pick the aiming point you like best.
The rare-earth magnet holds firmly on standard barrels under normal shooting. Guns with ported barrels or actions that recoil back into the receiver can occasionally shake a magnetic sight loose, and some folks add a small dab of silicone for extra hold during rough transport. For most vent-rib shotguns it stays where you put it.
| UPC | 613485588590 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | TO200 |
| Color | Green, Orange |
| Length | 6.6500 |
| Model | |
| Product Type | Sight |
You must be logged in to post a review.
Reviews
There are no reviews yet.