Description
The MDT Gen2 Polymer AICS Magazine is a detachable 10-round box mag made for shooters running 6mm ARC in a short action AICS-pattern setup. It's molded from glass-filled nylon polymer with a tempered steel spring inside, so you get a mag that's light on the rifle, quiet when you handle it, and simple to keep clean. MDT also lists it as compatible with .22 ARC, which makes it a handy option if you're bouncing between those two calibers.
What Sets the MDT Gen2 Polymer Mag Apart
The standout here is the Double Stack to Single Feed (DSSF) transition design. It feeds rounds up through a single-feed geometry at the top, which trims the overall rear height down to around 4.95 inches compared to taller industry-standard mags. That lower profile matters for prone work and bench setups where you want the mag clearing the ground and cycling without drama. It runs a max cartridge overall length of 2.480 inches, so you've got room for most loaded 6mm ARC rounds.
Fit and Compatibility for the 6mm ARC Gen2 Magazine
This mag drops into short action AICS mag wells, which covers a wide range of MDT chassis and bottom metals along with other M24/AICS-pattern systems. One thing worth flagging: this polymer mag is built for AICS-pattern chassis, not the Ruger American Gen 2 rifle mag well. If you're running a Ruger American Gen 2 in 6mm ARC, MDT points folks toward their metal mags for that platform instead.
At roughly 3.8 ounces empty, it keeps weight down without feeling flimsy. MDT puts these through heavy testing and leans on a high glass content polymer for strength, so it holds up to real range time and field use. If you're building out a 6mm ARC precision or hunting rig on an AICS footprint, this is a solid, no-nonsense feeding option to stack a few of in the bag.
Key Specifications
- Manufacturer: MDT
- MPN: 106535-BLK
- UPC: 990482713713
- Caliber: 6mm ARC (also compatible with .22 ARC / 6.5 Grendel pattern)
- Capacity: 10 Rounds
- Material: Glass-Filled Nylon Polymer
- Spring: Tempered Steel
- Color / Finish: Black
- Pattern: Short Action AICS / M24
- Feed Design: DSSF (Double Stack to Single Feed)
- Max C.O.A.L.: 2.480 in
- Rear Height: 4.95 in
- Outside Length: 3.36 in
- Weight: 3.8 oz
- Product Type: Rifle Magazine
What’s Included
- One MDT Gen2 Polymer AICS Magazine, 6mm ARC, 10-round, black
Frequently Asked Questions
What rifles and chassis does the MDT Gen2 6mm ARC magazine fit?
It's designed for short action AICS mag wells, which covers a wide range of MDT chassis and bottom metals plus other M24/AICS-pattern systems. If your setup uses the standard short action AICS footprint, this mag drops right in. Always double-check your chassis or bottom metal lists AICS short action compatibility.
Will this polymer mag work in a Ruger American Gen 2 in 6mm ARC?
No, this polymer mag is built for AICS-pattern mag wells, not the Ruger American Gen 2 rifle. MDT advises using their metal magazines for the Ruger American Gen 2 platform instead. Make sure you match the mag to the right mag well so you get reliable feeding.
What is the DSSF feed design on the MDT Gen2 magazine?
DSSF stands for Double Stack to Single Feed. The rounds stack double in the body and transition to a single feed at the top, which lowers the overall rear height compared to taller standard mags. That shorter profile helps with prone shooting and keeps the mag clearing the ground on a bench.
Can the MDT 6mm ARC polymer mag run .22 ARC too?
Yes, MDT lists this magazine as compatible with both 6mm ARC and .22 ARC since they share the same case head and feeding geometry. That makes it a flexible pick if you run both calibers on an AICS-pattern rig. It holds 10 rounds with a max cartridge overall length of 2.480 inches.





Reviews
There are no reviews yet.