Description
The Akkar USA Target Force High-Vis is a 12 gauge over/under made for one thing: breaking clays all day long. It runs 30-inch vent rib barrels with a 2.75-inch chamber sized for the full range of target loads, and the high-gloss OxyCap aluminum alloy receiver sitting under those high-gloss barrels gives it a look that holds up on the line. The gloss walnut stock rounds out a gun that feels like a competition piece without the five-figure sticker.
The real story here is the rib. The high-profile rib starts ramping up about 18 cm in front of your eye, lifting your sight plane off the barrels so you see more target and less gun. That taper runs from 10mm at the breech down to 8mm at the muzzle, which keeps your sight alignment consistent from the receiver out to the end of the barrels. Pair that with a .730 bore diameter, kept close to a true 12-gauge bore for a proper wad seal and truer velocities, and you get a gun built around a repeatable, confident sight picture.
Dialing In Your Target Force High-Vis
Fit is where this gun earns its keep. The fully adjustable comb and butt plate let you tune cheek weld and length of pull instead of settling for whatever comes off the rack. That matters when you are mounting the same gun a few hundred times across a tournament day and need your eye landing in the same spot every single time.
Running the Target Force on the Line
Controls are quick and intuitive. The tang safety doubles as a barrel selector, so swapping between your two choke and barrel combos is fast between targets. Automatic ejectors kick empties clear for faster reloads between pairs, and if you prefer to pluck your hulls, they convert over to extraction. Seven extended choke tubes come along to cover the range of constrictions you rotate through across Trap, Skeet, Sporting, and FITASC, and the whole package ships in a Negrini ABS carry case to get it from the truck to the station in one piece.
Key Specifications
- Manufacturer: Akkar USA
- Model: Target Force High-Vis
- Manufacturer Part Number: 131201
- UPC: 766646631304
- Action: Break Action Over/Under
- Gauge: 12 Gauge
- Chamber: 2.75"
- Capacity: 2
- Barrel Length: 30"
- Barrel Finish: High Gloss, Vent Rib
- Bore Diameter: .730"
- Rib: High-Profile, tapered 10mm to 8mm
- Receiver: High-Gloss OxyCap Aluminum Alloy
- Stock: Gloss Walnut, Adjustable Comb & Butt Plate
- Ejectors: Automatic (convertible to extraction)
- Safety: Tang Safety with Barrel Selector
What’s Included
- Akkar USA Target Force High-Vis over/under shotgun
- 7 extended choke tubes
- Negrini ABS carry case
Frequently Asked Questions
What clay disciplines is the Target Force High-Vis built for?
This one is a do-it-all target gun set up for Trap, Skeet, Sporting, and FITASC. The high-profile rib and adjustable fit make it flexible enough to move between disciplines, and the seven included chokes cover the constrictions you need across those events.
What makes the high-profile rib different from a standard rib?
The rib starts ramping up about 18 cm in front of your eye, which lifts your sight plane off the barrels and opens up your view around the gun. The result is you see more of the target and less of the shotgun, which helps with faster, more confident target acquisition. It also tapers from 10mm to 8mm to keep your sight picture consistent down the length of the barrels.
Can I adjust the stock to fit me?
Yes, the Target Force High-Vis comes with a fully adjustable comb and butt plate. That lets you tune your cheek weld and length of pull so the gun lines up the same way every mount, which is exactly what you want when you are running it hard through a full tournament day.
Does it come with chokes and a case?
It ships with seven extended choke tubes and a Negrini ABS carry case. That gives you a full range of constrictions to match your targets and a solid case to haul the gun back and forth from the line.



Reviews
There are no reviews yet.