Description
Anyone who has fought with a stubborn takedown pin on a tight-tolerance AR lower knows the frustration of mashing your thumb against a flush pin head that won't budge. The Forward Controls Design PF-040 set solves that problem with a smart twist on the usual extended-pin approach. Rather than fattening up the head side of the pins, FCD extended them on the left side of the receiver. When you push them through from that side, that extra 0.040 of length turns into grasping area on the right, so you get real leverage and a surface you can actually grab onto.
What Makes the PF-040 Reverse-Extended Design Tick
Most extended pins beef up the pull side, which can get in the way of ambidextrous safety selectors or risk bumping loose. The PF-040 goes the other direction. Because the added length lives on the opposite side, it doesn't interfere with ambi safety operation and won't accidentally activate during use. The heads stay clean and uncluttered, in keeping with FCD's function-over-looks philosophy, and there's a small dimple on the tail of each pin so you can use a bullet tip or punch to start them through on especially snug receivers.
Materials and Fit on the PF-040 Pin Set
These start life as 17-4 PH stainless steel bar stock, then get precision machined and finished with a smooth salt bath nitride (QPQ) coating that makes them glide. Pin diameter holds to TDP dimensions and tolerances at 0.2485 inches (+0.000/-0.005), so they fit AR-15 and M16 lowers as a straight replacement. The silky finish paired with the leverage makes pulling the pin for cleaning or breakdown about as easy as it gets.
One thing worth noting: the PF-040 may not clear PDW-style stocks that have bars overlapping the takedown pin holes, so give yours a look if you're running that kind of setup. For everyone else building or upgrading a standard AR lower, this is one of those small-parts swaps you'll appreciate every single time you open the gun up.
Key Specifications
- Manufacturer: Forward Controls Design
- Manufacturer Part Number: PF-040
- UPC: 680665827107
- Platform: AR-15 / M16
- Caliber: 5.56x45mm
- Pin Set: Pivot pin and takedown pin (set of 2)
- Extra Length: 0.040 inches longer than TDP spec
- Pin Diameter: 0.2485 in (+0.000/-0.005)
- Material: 17-4 PH stainless steel bar stock
- Finish: QPQ / salt bath nitride, black
- Hand Orientation: Ambidextrous
- Design: Reverse-extended (extended on left side of receiver)
- Origin: Made in USA
What’s Included
- 1x Pivot pin
- 1x Takedown pin
Frequently Asked Questions
Do the PF-040 pins come with detents and springs?
No, the PF-040 set ships as the two pins only. Detents and springs are sold separately or come included with FCD's lower parts kits. If you're building a lower from scratch, grab the optional small parts kit so you have detents and springs on hand.
What does the 0.040 extended length do on the PF-040?
The pins are 0.040 inches longer than standard TDP-spec pins, with that extra length placed on the left side of the receiver. When you push a pin through from the left, the added length becomes extra grasping area on the right side, giving you leverage and grip to pull it easily. It's especially helpful on tight-tolerance receivers that are tough to open by hand.
Will the PF-040 interfere with an ambidextrous safety selector?
No. Because the extension lives on the left side rather than fattening up the head, the PF-040 clears ambi safety selectors and operates without getting in the way. The reverse-extended design also avoids accidental activation.
Are these a drop-in replacement for standard AR-15 pins?
Yes, the PF-040 holds to TDP diameter of 0.2485 inches and installs by conventional means as a direct replacement in AR-15 and M16 lowers. One exception: they may not work with PDW-style stocks that have bars overlapping the takedown pin holes, so check your setup if you run that kind of stock.





Reviews
There are no reviews yet.