0
0

RCBS MatchMaster 8mm x 57 Mauser Competition Full Length Bushing Die Set

UPC: 604544653854

$173.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RCBS MatchMaster Competition Full Length Bushing Die Set is built for the 8mm x 57 Mauser handloader who wants match-level consistency out of every round. This two-die set pairs a full length bushing sizing die with a micrometer-adjustable seating die, giving you the kind of control usually reserved for benchrest and long range precision work. Fit and finish is top shelf, with a deep blued body and oversized adjustment markings that are easy to read on the bench.

What Sets the MatchMaster 8×57 Bushing Die Apart

The sizing die uses an interchangeable, self-centering neck bushing to size the neck from the outside, which lets you dial in exactly how much neck tension you want on the bullet. That bushing system keeps the brass working to a minimum, so your cases last longer and your velocities stay more consistent. A titanium carbo-nitride coated expander runs inside the neck for smooth case extraction and less brass buildup on the expander itself, and it also helps keep the inside of the neck round and concentric. Worth noting up front: the neck bushings are sold separately, so you'll want to pick up the right size (or a couple around it) before your first session.

Setting Up the 8mm Mauser Competition Seating Die

The seater die is where this set really shines. A large micrometer head lets you set and reset cartridge overall length in one-thousandth increments, and the oversized hash marks make small adjustments painless. The free-floating, self-centering seating stem keeps bullets aligned as they seat, and the bullet loading window means you drop the bullet in through the side and simply run the press. No more mashed fingers or crooked bullets.

The set threads into any standard 7/8-14 reloading press and arrives with the die set, a spare decapping stem assembly, an instruction manual, and a reloading data card. Made in the USA and backed by RCBS, it's a smart upgrade for anyone chasing tighter groups out of their 8×57 rifle.

Key Specifications

  • Manufacturer: RCBS
  • Series: MatchMaster Competition
  • Caliber: 8mm x 57 Mauser (7.92×57 / 8×57 IS)
  • Die Set Type: Full Length Bushing, 2-Die Set
  • Sizing Die: Full Length Bushing with TiCN Expander
  • Seating Die: Micrometer Adjustable, Self-Centering Stem
  • Neck Tension Control: Interchangeable Neck Bushing (sold separately)
  • Adjustment: Micrometer, 0.001 inch increments
  • Press Thread: Standard 7/8-14
  • Bullet Diameter: .323 inch / 8.00 mm
  • Country of Origin: USA
  • Manufacturer Part Number: 15908
  • UPC: 604544653854

What’s Included

  • Full length bushing sizing die
  • Micrometer-adjustable seating die
  • Spare decapping stem assembly
  • Instruction manual
  • Reloading data card

Frequently Asked Questions

Do I need to buy neck bushings separately for this 8×57 Mauser die set?

Yes. The MatchMaster full length sizing die uses interchangeable neck bushings to control neck tension, and those bushings are not included in the set. To pick the right size, measure the outside neck diameter of a loaded cartridge and subtract about .002 to .003 inch. It's a good idea to grab one bushing above and below your target size so you can experiment with tension.

What presses will the MatchMaster 8mm Mauser die set work with?

The dies use a standard 7/8-14 thread, so they'll thread into just about any common single stage or turret press. A shellholder is required but is not part of the set. You'll want the shellholder sized for the 8×57 Mauser case head.

What makes the MatchMaster seating die better than a standard seater?

The seating die has an oversized micrometer head that lets you set cartridge overall length in one-thousandth-inch increments and return to it precisely. A free-floating, self-centering stem keeps bullets aligned as they seat for better concentricity. The side loading window also lets you drop the bullet in without pinching your fingers against the press.

Why is there an expander if the bushing already sizes the neck?

The neck bushing reduces the neck diameter from the outside, while the titanium carbo-nitride expander passes through the inside of the neck to make it perfectly round and concentric. This is especially helpful with brass that has uneven neck-wall thickness. The coating on the expander also keeps case extraction smooth and reduces brass buildup.

Additional information

UPC

604544653854

Manufacturer

Manufacturer Part Number

15908

Reviews

There are no reviews yet.

Be the first to review “RCBS MatchMaster 8mm x 57 Mauser Competition Full Length Bushing Die Set”