Description
The CZ 457 American SR takes everything folks love about the 457 platform and builds it into a suppressor-ready .17 HMR. The 24-inch cold hammer forged barrel wears a threaded muzzle, so you can mount a can without any gunsmithing, and the whole barreled action carries a nitride finish that shrugs off weather and handling. It's dressed in a Turkish walnut American-style stock with cut checkering, a straight comb, and sling swivel studs, which gives it that traditional sporter look while keeping it practical in the field.
Why the 457 American SR Shoots So Well
The .17 HMR is a flat-shooting, fast little cartridge, and the 457's 1:9 twist is dialed in to stabilize those 17-grain loads for tight groups downrange. CZ cuts these chambers to tight tolerances, and the cold hammer forged barrel delivers the kind of consistency this round is known for. Paired with a good scope, this is the sort of rifle that rewards careful trigger time on prairie dogs, ground squirrels, and paper alike.
Handling and the CZ 457 Action
The heart of this rifle is CZ's refined 457 action with a short 60-degree bolt throw, which keeps the handle clear of your optic and makes for quick, smooth cycling. The trigger is fully adjustable from roughly 1.8 to 3.4 pounds, so you can tune the break to exactly what you like. A two-position push-to-fire safety sits in a familiar spot for anyone raised on American sporters, and the switch-barrel design means you can swap barrels and calibers down the road if you want to grow with the platform.
Topping Off the 457 American SR
There are no iron sights on this one, which is the right move for a .17 HMR since the cartridge really comes alive with glass on top. The receiver has an 11mm dovetail milled directly into it for mounting CZ rings or compatible bases, giving you a solid, repeatable optic setup. Feeding comes from a detachable 5-round magazine that latches in with a positive, audible click.
Key Specifications
- Manufacturer: CZ-USA
- Model: 457 American Suppressor-Ready
- Manufacturer Part Number: 02404
- UPC: 806703024042
- Caliber: .17 HMR
- Action: Bolt Action
- Barrel Length: 24 in
- Barrel Type: Cold Hammer Forged, Threaded, Light Profile
- Twist Rate: 1:9
- Magazine Capacity: 5 rounds
- Magazine Type: Detachable Box
- Stock: Turkish Walnut, American-Style
- Finish: Nitride
- Sights: None, Integrated 11mm Dovetail
- Trigger: Fully Adjustable, approx. 1.8 to 3.4 lbs
- Safety: Two-Position, Push-to-Fire
What’s Included
- CZ 457 American SR rifle
- One 5-round detachable magazine
- Owner's manual
Frequently Asked Questions
Is the barrel on the CZ 457 American SR threaded?
Yes. The SR stands for Suppressor-Ready, and the 24-inch cold hammer forged barrel comes with a threaded muzzle from the factory. That means you can mount a rimfire suppressor or other muzzle device without any extra machining.
Does the CZ 457 American SR come with sights?
No, this rifle ships without iron sights, which is standard for a .17 HMR built around optics. The receiver has an 11mm dovetail milled directly into it, so you can mount CZ rings or a compatible base and top it with the scope of your choice.
Can I swap barrels or calibers on the 457 American SR?
Yes. All CZ 457 rifles use the switch-barrel design, which lets you change interchangeable barrels and calibers quickly and securely. If you pick up a .22 LR or .22 WMR barrel set later, you can build it onto the same action.
What is the trigger like on the CZ 457 American SR?
The 457 uses a fully adjustable single-stage trigger that can be tuned roughly between 1.8 and 3.4 pounds. Out of the box it tends to break clean and crisp, and you can dial it in further to match your preference for target work or hunting.




Reviews
There are no reviews yet.