Description
If you shoot the .300 Weatherby Magnum and want to stop guessing at seating depth, the Lee 92423 Micrometer Full Length 2-Die Set is built to take the mystery out of your handloads. This two-die setup pairs a full length sizing die with a laser-engraved micrometer seating die, so you can resize your brass for reliable feeding and fine-tune your bullet seating depth with real precision instead of trial and error.
What Sets the Lee 92423 Micrometer Seater Apart
The star of this set is the micrometer bullet seating die. The thimble is laser engraved and reads just like a precision depth micrometer, with each division representing one thousandth of an inch. That means you can note your favorite setting, back it off, and dial right back to it later without hunting for the sweet spot again. A floating bullet guide helps keep run-out down, which translates to straighter ammo and better consistency on paper. Folks who run large batches tend to appreciate that once the seater is set, it stays put.
Full Length Sizing for .300 Weatherby Brass
The full length sizing die returns your cases to SAAMI dimensions, so they chamber cleanly whether you're loading new brass or mixed range pickups. Lee machines these dies to tight tolerances and sizes to SAAMI maximum, which works your brass less and helps it last. There's also a built-in stuck case remover, so if a case ever hangs up you can free it with simple hand tools rather than buying a separate kit.
A Complete Starting Point for the 300 Wby Magnum
This is a smart pick for hunters and range reloaders who want factory-dimensioned ammo that feeds in any .300 Weatherby rifle. The set includes the shell holder, powder dipper, and load data, so you've got the essentials to get rolling. If you plan to hunt or your magazine length keeps the bullet off the rifling, Lee suggests adding their Factory Crimp die to lock in accuracy, though that's sold separately.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92423
- UPC: 734307924232
- Cartridge: .300 Weatherby Magnum
- Die Set Type: Micrometer Full Length 2-Die Set
- Gun Type: Rifle
- Seating Adjustment: Laser-engraved micrometer, 0.001 inch divisions
- Thread: 7/8 x 14
- Shipping Weight: 0.46 lbs
What’s Included
- Full Length Sizing Die
- Micrometer Bullet Seating Die
- Universal Shell Holder
- Powder Dipper
- Instructions with load data
Frequently Asked Questions
What comes in the Lee 92423 300 Weatherby die set?
The set includes a full length sizing die, a micrometer bullet seating die, a universal shell holder, a powder dipper, and instructions with load data. That covers the core tools needed to start loading .300 Weatherby Magnum. Bullets, powder, primers, and brass are purchased separately.
Does this Lee die set include a crimp die?
No, the 92423 is a two-die set with a sizing die and a micrometer seating die only. If you're loading for hunting or your magazine length keeps the bullet off the rifling, Lee recommends adding their Factory Crimp die to help maintain accuracy. The Factory Crimp die is sold separately.
How precise is the micrometer seating adjustment?
The micrometer thimble is laser engraved and reads just like a precision depth micrometer, with divisions marked in one thousandth of an inch increments. A floating bullet guide helps reduce run-out for straighter, more consistent ammo. Once you find a setting you like, you can return to it exactly, which is handy for load development.
Will the sizing die work with range brass fired in other rifles?
Yes, the full length sizing die resizes the entire case back to SAAMI dimensions, so it's a good choice for new brass or mixed range pickups fired in different rifles. This produces ammo that feeds reliably in any .300 Weatherby chamber. The die also has a built-in stuck case remover if a case ever hangs up.




Reviews
There are no reviews yet.