Description
Finishing an AR-15 lower usually means chasing down a dozen tiny parts and then picking a trigger separately. This Ruger kit skips all of that. It packs everything you need to build out a mil-spec lower around the Ruger Elite 452 two-stage trigger, and it tops things off with a Magpul MOE K2 grip so you are not running a bare A2 on day one. The whole thing fits standard AR-15 receivers using .154-inch trigger and hammer pins, which covers the vast majority of builds out there.
What the Ruger Elite 452 Trigger Brings to the Table
The Elite 452 is a two-stage trigger with a smooth, crisp 4.5-pound pull, which is a noticeable step up from the gritty single-stage triggers that ship in a lot of factory rifles. It uses a lightweight hammer for roughly 30 percent faster lock time over standard MSR triggers, paired with a full-strength hammer spring so you get consistent primer ignition. That combination means you feel a predictable take-up, a clean wall, and a break you can actually learn to call shots with.
The Magpul MOE K2 Grip and Ambi Controls
The included Magpul MOE K2 grip runs a 17-degree near-vertical angle, which positions your firing hand more comfortably on shorter length-of-pull and compact builds. It wears Magpul's aggressive TSP texture for a solid hold in any weather, and the ridged beavertail backstrap helps set your trigger finger where it should be. On top of that, the kit includes an ambidextrous safety selector, so lefties and righties both get easy thumb access without buying extra parts.
Everything You Need to Complete a Ruger AR Lower
Along with the trigger and grip, you get the ambi safety selector assembly, magazine catch, bolt catch, takedown and pivot pins with their detents and springs, buffer retainer, trigger guard, and all the associated springs. It is a grab-and-go solution for anyone finishing a stripped lower or refreshing an older build. A little gunsmithing know-how or a bench full of basic punches makes install straightforward for most folks.
Key Specifications
- Manufacturer: Ruger / Sturm, Ruger & Co.
- Manufacturer Part Number: 91000
- UPC: 736676910007
- Model: Lower Parts Kit
- Product Type: AR Lower Parts Kit
- Trigger: Ruger Elite 452 Two-Stage
- Trigger Pull: 4.5 lb
- Pin Size: .154-inch trigger/hammer pins
- Grip: Magpul MOE K2 (17-degree near-vertical angle)
- Safety Selector: Ambidextrous
- Platform Fit: AR-15 / M4-pattern
- Shipping Weight: 0.66 lb
What’s Included
- Ruger Elite 452 two-stage trigger
- Two-stage hammer assembly with hammer spring
- Disconnector and disconnector spring
- Trigger spring
- Two trigger/hammer pins
- Ambidextrous safety selector switch, body, cap, and screw
- Safety selector detent
- Magpul MOE K2 grip with grip screw, washer, and adjustment screw
- Magazine catch, catch button, and catch spring
- Bolt catch, spring, plunger, and pin
- Takedown pin and pivot pin with detents and springs
- Buffer retainer and buffer retainer spring
- Ejector spring
- Trigger guard assembly with pin and retainer spring
Frequently Asked Questions
Will this Ruger AR lower parts kit fit any AR-15 lower?
It fits standard AR-15 and M4-pattern receivers that use .154-inch trigger and hammer pins, which is the dimension found on the vast majority of mil-spec lowers. That includes Ruger models like the AR-556, SR-556, and SR-762. If your lower is built to mil-spec tolerances, this kit is designed to drop right in.
What makes the Ruger Elite 452 trigger worth upgrading to?
The Elite 452 is a two-stage trigger with a smooth, crisp 4.5-pound pull, which beats the mushy single-stage triggers that come in a lot of factory rifles. It uses a lightweight hammer for about 30 percent faster lock time and a full-strength hammer spring for reliable primer ignition. The result is a cleaner break and better consistency shot to shot.
Does the kit come with an ambidextrous safety?
Yes. The kit includes a full ambidextrous safety selector with the switch, body, cap, screw, and detent. That gives both left and right-handed builders thumb access to the safety without needing to buy anything extra.
What is different about the Magpul MOE K2 grip included here?
The MOE K2 runs a 17-degree near-vertical grip angle, which is steeper than a standard A2 grip. That angle shines on compact and short length-of-pull builds where you pull your firing hand in closer to your body. It also features aggressive TSP texturing and a beavertail backstrap for a secure, comfortable hold.




Reviews
There are no reviews yet.