Description
The Thompson/Center Encore Pro Hunter rifle barrel in 22-250 Remington is one of those parts that turns a single-shot frame into whatever you need for the day. This is the matte blued 26-inch fluted barrel, part number 8161R, built to drop onto any Encore or Pro Hunter frame without a trip to the gunsmith. The 22-250 is a classic flat-shooting round for varmints, coyotes, and long-range target work, and this barrel gives you all of it in a package you can swap out in a couple minutes.
What the 8161R Barrel Brings to the Table
You get a 26-inch fluted barrel with a 1:12 twist, which pairs nicely with the lighter 40 to 55 grain bullets the 22-250 is known for. The fluting trims weight while keeping the barrel stiff, and the matte blued finish helps it shrug off the weather on long days in the field. T/C barrels are button rifled, brush honed, and finished with a match-grade crown, so the accuracy reputation is earned, not marketing talk. The muzzle comes threaded 1/2-28, so running a brake or a suppressor is a bolt-on job.
Dropping the Barrel onto Your Encore Frame
The whole appeal of the Encore and Pro Hunter system is how easy it is to change calibers. Pull the forend screws, slide out the hinge pin, set your new barrel in place, drop the pin back in, and you're done. If the barrel isn't seated right it won't close, so there's a built-in safety net. Encore and Pro Hunter barrels interchange freely, so this one will fit either frame.
Mounting Optics on the Pro Hunter 22-250 Barrel
This barrel is drilled and tapped for a scope base using the standard T/C four-hole pattern. Because the optic mounts to the barrel itself rather than the frame, your zero stays put when you swap barrels back and forth. Mount a scope once, sight it in, and that barrel holds its zero the next time you pull it out of the safe.
Key Specifications
- Manufacturer: Thompson/Center
- Manufacturer Part Number: 8161R
- UPC: 810180303316
- Platform Fit: Encore / Encore Pro Hunter frames
- Caliber: 22-250 Remington
- Barrel Length: 26"
- Finish: Matte Blued
- Barrel Profile: Fluted
- Twist Rate: 1:12
- Threaded Muzzle: Yes, 1/2-28
- Optics Mounting: Drilled and tapped, standard T/C 4-hole pattern
- Rifling: Button rifled, brush honed, match-grade crown
What’s Included
- Thompson/Center Encore Pro Hunter 22-250 Rem rifle barrel (26" blued, fluted, threaded 1/2-28)
Frequently Asked Questions
Will this Encore Pro Hunter 22-250 barrel fit my standard Encore frame?
Yes. Encore and Encore Pro Hunter barrels are fully interchangeable, so this barrel drops onto either frame. You do not need a gunsmith to make the swap.
Is the muzzle on the 8161R barrel threaded?
It is. The muzzle comes threaded 1/2-28, so you can run a muzzle brake or a suppressor without any machining. It's a straight bolt-on if you already have a compatible device.
Can I mount a scope on this barrel?
Yes. The barrel is drilled and tapped for a scope base using the standard T/C four-hole pattern. Since the optic mounts to the barrel and not the frame, your zero follows the barrel when you swap it in and out.
What bullet weights work best with the 1:12 twist?
The 1:12 twist is well suited to the lighter bullets the 22-250 runs best, generally in the 40 to 55 grain range. That makes it a strong pick for varmints, predators, and flat-shooting range work.





Reviews
There are no reviews yet.