Description
If you own an HK VP40 or VP40 Tactical and have been wanting to run a suppressor, this is the part that gets you there. It's a genuine HK factory barrel chambered in .40 S&W, machined in Germany to the same tolerances as the barrel that came in your pistol, with a 14.5×1 left-hand thread pattern up front and a thread protector to keep the muzzle clean when you're running bare.
What Sets the VP40 Tactical Barrel Apart
The build quality is the real story here. This barrel is cold hammer forged from ordnance-grade steel, which is the same process HK uses on its service guns and part of why these barrels hold up round after round. The polygonal rifling runs a roughly 1:10 right-hand twist, and the feed ramp comes micro-polished from the factory, so feeding stays smooth whether you're shooting range ammo or something heavier. At 4.45 inches it keeps the sight radius and balance close to a standard VP40 while leaving threads exposed for a can or other muzzle device.
Fitting the HK 223244 to Your VP40
Because it's cut to exact HK specifications, this is a true drop-in swap. Field strip your pistol, pull the factory barrel, drop this one in, and reassemble. No fitting, no gunsmithing, no sanding to get it to sit right. That's the advantage of going with the actual HK part instead of an aftermarket copy, and it's a big reason owners keep coming back to the factory barrel for this platform.
It works equally well as a dedicated suppressor host barrel or simply as a spare to keep on hand. Pair it with a .40 or multi-cal can rated for the round and you've got a quieter, softer-shooting VP40 without touching the slide, trigger, or anything else that makes the pistol feel the way it does.
Key Specifications
- Manufacturer: Heckler & Koch (HK)
- Model: VP40 Tactical Threaded Barrel
- Manufacturer Part Number (MPN): 223244
- UPC: 642230255746
- Caliber: .40 S&W
- Barrel Length: 4.45"
- Thread Pattern: 14.5×1 LH
- Twist Rate: Approx. 1:10 RH
- Rifling: Polygonal
- Material: Cold hammer forged ordnance-grade steel
- Finish/Color: Black
- Country of Origin: Germany
- Fits: HK VP40 and VP40 Tactical
- Fitment: Drop-in, machined to HK tolerances
What’s Included
- HK VP40 Tactical threaded barrel (.40 S&W, 4.45")
- Thread protector
Frequently Asked Questions
What pistols does this HK VP40 threaded barrel fit?
It's designed for the HK VP40 and VP40 Tactical chambered in .40 S&W. It's a true drop-in part machined to factory HK tolerances, so it swaps right into either pistol with a standard field strip. It will not fit the 9mm VP9 since the chambering and dimensions are different.
What is the thread pitch on the 223244 barrel?
This barrel uses a 14.5×1 left-hand thread pattern at the muzzle. That matches HK's tactical barrel spec, so you'll want a suppressor or muzzle device set up for 14.5×1 LH or an adapter that converts to it. Double check your can's thread mount before ordering an adapter.
Do I need a gunsmith to install this VP40 Tactical barrel?
No. It's cut to exact HK specifications for a drop-in fit, so you field strip the pistol, remove the factory barrel, and install this one with no fitting required. If you've taken your VP40 apart for cleaning before, you already know the whole process.
Can I shoot this barrel without a suppressor attached?
Absolutely. The barrel comes with a thread protector so you can shoot it unsuppressed and keep the threads clean and protected. Plenty of owners run one simply as a factory spare and only add a can when they want it.



Reviews
There are no reviews yet.