Description
The Reaper H-TAC 2.0 is Fierce Firearms answer to the age-old tug of war between a dedicated long-range rig and a rifle you can carry up a mountain. This one splits the difference in the 6.5 Creedmoor chambering with a 20-inch barrel, wearing the Tungsten Cerakote finish that gives it that clean gray look. It's the kind of rifle that shoots like a chassis gun but doesn't punish you on a long pack-in.
What Makes the Reaper H-TAC 2.0 Tick
The backbone here is a two-lug stainless steel action with wire EDM-cut raceways and a fast 70-degree bolt throw, which keeps your hand clear of the scope when you cycle it quick. The hand-lapped C3 carbon fiber barrel carries a .5 MOA accuracy guarantee, measured as three-shot groups at 100 yards with quality ammo. Up front the muzzle is threaded 5/8×24, so mounting a suppressor is a direct affair, and the rifle ships with a titanium NIX brake to tame recoil until you do.
Built to Fold, Built to Dial
The folding aluminum chassis paired with the C3 carbon fiber stock is what makes this rifle special. It keeps the whole package starting around 6.5 pounds while giving you the feel and adjustability of a modern tactical setup. You get a vertical pistol grip, a push-button adjustable cheekpiece for a repeatable cheek weld, an M-LOK handguard for accessories, and a Swiss Arca rail that drops straight onto a tripod head with no adapter needed.
Dialing In the Trigger
Every Reaper leaves the shop with a TriggerTech Primary Pro trigger set at 2.5 pounds, and you can tune it anywhere from 1.5 to 4 pounds to match your preference. Combined with a 1:8 twist barrel that loves heavier 6.5 bullets, this rig is set up to reach out and stay honest well past the point where a lighter hunting rifle starts to wander. It's a genuine crossover: precision-match capability in a body that still wants to go hunting.
Key Specifications
- Manufacturer: Fierce Firearms
- Model: Reaper H-TAC 2.0
- Caliber: 6.5 Creedmoor
- Barrel Length: 20 inches
- Barrel: Hand-lapped C3 carbon fiber, match grade
- Twist Rate: 1:8
- Muzzle Thread: 5/8×24
- Muzzle Device: Titanium NIX brake
- Action: 2-lug stainless steel, 70-degree bolt throw
- Trigger: TriggerTech Primary Pro, set at 2.5 lbs, adjustable 1.5 to 4 lbs
- Stock/Chassis: Folding aluminum chassis with C3 carbon fiber stock
- Rail: Swiss Arca rail with M-LOK handguard
- Magazine Capacity: 3+1 detachable
- Weight: Starting around 6.5 lbs
- Finish: Tungsten Cerakote
- Accuracy Guarantee: .5 MOA
- MPN: REPHT65CM20TU
- UPC: 853418428764
What’s Included
- Reaper H-TAC 2.0 rifle in 6.5 Creedmoor
- TriggerTech Primary Pro trigger (installed)
- Titanium NIX muzzle brake (installed)
- Detachable magazine
- Owner's manual
Frequently Asked Questions
How accurate is the Reaper H-TAC 2.0 out of the box?
Fierce backs this rifle with a .5 MOA accuracy guarantee, measured as three-shot groups at 100 yards using quality factory or custom ammo. The hand-lapped C3 carbon barrel and 1:8 twist do the heavy lifting there. Pair it with match-grade 6.5 Creedmoor loads and a good optic and you'll see what it's capable of.
Does the H-TAC 2.0 chassis really fold?
Yes. The folding aluminum chassis is the whole point of this platform, letting you collapse the rifle down for a pack or a case and then deploy it trail-ready. Even folded, it keeps the modern chassis feel with a vertical grip and adjustable cheekpiece.
Can I run a suppressor on this rifle?
You can. The 20-inch barrel comes threaded 5/8×24, which is the standard pitch for most 6.5 and .30 caliber cans, so it's a direct mount. It ships with a titanium NIX brake installed, which you can swap off when you're ready to run a suppressor.
What makes the Reaper H-TAC 2.0 different from the MTN Reaper?
The H-TAC 2.0 uses a stainless steel action, which runs slightly heavier than the titanium action found in the MTN Reaper. Both share the same folding chassis platform and carbon components. The H-TAC leans a touch more toward the tactical and long-range side while still being light enough to hunt with.




Reviews
There are no reviews yet.