0
0

Sig Sauer Alpha3 SOA30012 30mm Scope Mount, FDE, Picatinny

UPC: 798681666645

$229.99

8 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Sig Sauer Alpha3 SOA30012 is a one-piece scope mount built to hold a 30mm riflescope tube rock solid on a Picatinny rail. Machined from a single block of 7075-T6 aluminum, the whole unit trades the adjustability of separate rings for the kind of rigidity that keeps your zero honest round after round. Because the rings are cut as part of one piece, alignment is set at the factory, which means no lapping or shimming before you ever get your optic dialed in. It carries a 1.535-inch height measured from the centerline of the optic to the top of the rail, which is on the taller side and plays nicely with larger objective scopes and clearing optics or iron sights underneath.

What Makes the Alpha3 Mount Worth a Look

Sig went with titanium hardware on this one, which cuts weight and shrugs off corrosion better than standard steel fasteners. The mount is finished in Flat Dark Earth, so it blends right in with FDE rifles and tan furniture instead of standing out. The clamp interface is MIL-STD-1913, the same slot pattern you'll find on just about every modern bolt gun, AR, and chassis rifle out there, so position along the rail is yours to set wherever eye relief lands best.

Getting the Alpha3 Scope Mount Dialed In

Sig lists clear torque numbers to take the guesswork out of installation. The rail clamp nut takes 65 in/lbs, and the T15 Torx ring screws get 25 in/lbs. Stick to those figures with a good torque wrench and you'll get even clamping pressure around the tube without crushing it.

Sized for the 30mm tube that has become the standard on most modern scopes, the Alpha3 is a sensible match for precision rigs, hunting setups, and anything in between. It's backed by Sig Sauer's Infinite Guarantee, so you're covered for the long haul.

Key Specifications

  • Manufacturer: Sig Sauer Electro-Optics
  • Model: Alpha3
  • Manufacturer Part Number: SOA30012
  • UPC: 798681666645
  • Tube Diameter: 30mm
  • Mount Type: Picatinny Rail (MIL-STD-1913)
  • Material: 7075-T6 Aluminum
  • Hardware: Titanium
  • Finish: Flat Dark Earth
  • Height: 1.535 in (centerline of optic to top of rail)
  • Cant: 0 MOA
  • Construction: One-Piece Integral Mount
  • Rail Clamp Torque: 65 in/lbs (1/2 in nut)
  • Ring Screw Torque: 25 in/lbs (T15 Torx)
  • Warranty: Sig Sauer Infinite Guarantee

What’s Included

  • Sig Sauer Alpha3 one-piece 30mm scope mount
  • Titanium ring and clamp hardware

Frequently Asked Questions

What size scope tube does the Alpha3 SOA30012 fit?

This mount is built specifically for a 30mm scope tube, which is the most common size on modern riflescopes. It will not fit 1-inch or 34mm tubes without the wrong size rings. If you run a 34mm scope, Sig makes an Alpha3 variant sized for that tube instead.

Does the Sig Alpha3 mount require lapping before I install my scope?

No. Because it's a one-piece mount with the rings machined into a single block, the ring alignment is set at the factory. You can clamp your optic in without lapping or shimming, which saves time and the risk of marring your scope tube.

What rifles will the Alpha3 scope mount work with?

It clamps to any Picatinny rail that follows the MIL-STD-1913 slot pattern, which covers the vast majority of modern bolt guns, AR platforms, and chassis rifles. You can slide it along the rail to set the mount wherever your eye relief lands best.

What are the correct torque specs for installing the Alpha3 mount?

Sig calls for 65 in/lbs on the 1/2-inch rail clamp nut and 25 in/lbs on the T15 Torx ring screws. Using a quality torque wrench and sticking to those numbers gives you even clamping pressure around the tube. This keeps your optic secure without over-tightening and stressing the scope.

Additional information

UPC

798681666645

Manufacturer

Manufacturer Part Number

SOA30012

Model

Mount Type

Picatinny Rail

Reviews

There are no reviews yet.

Be the first to review “Sig Sauer Alpha3 SOA30012 30mm Scope Mount, FDE, Picatinny”