0
0

Fierce Carbon Rogue XP .308 Win 18″ Bolt Action Rifle Glacier/Phantom

UPC: 853418433287

$2,150.00

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

There is a reason the Carbon Rogue XP has become the best seller in the Fierce lineup. It takes the proven Fierce Dual-Lug stainless steel action, wraps a match grade C3 carbon fiber barrel around a hand-lapped stainless liner, and drops it all into a rigid C3 carbon stock. The result is a rifle that starts at roughly 5.8 pounds bare and still carries a .75 MOA accuracy guarantee from the factory. This one comes chambered in .308 Winchester with an 18 inch barrel and the Glacier stock over Phantom metalwork, a sharp looking combo that photographs well and hides wear even better.

Why the Carbon Rogue XP Earns Its Spot in the Truck

The 18 inch tube is the smart play for a .308. You give up very little velocity with this cartridge in a shorter barrel, and what you gain is a rifle that balances beautifully with a suppressor and swings fast in a treestand or a tight canyon. The muzzle is threaded 5/8×24, so mounting your can or brake takes seconds. Up top, the action follows the familiar Remington 700 footprint, which keeps scope base and accessory options wide open, and the spiral fluted bolt runs smooth without feeling sloppy.

Rogue XP Features That Matter in the Field

The XP designation gets you the detachable mag box, which makes loading and unloading at the truck quick and clean compared to feeding a blind magazine one round at a time. The TriggerTech Primary Pro ships set at 2.5 pounds and adjusts from 1.5 to 4, and it breaks clean enough that you will stop thinking about it after the first range session. QD flush cups keep your sling attachment low profile, and the stock's bedding keeps that carbon barrel floating and consistent shot after shot. For a deer and elk rifle you plan to carry a lot more than you shoot, this setup is tough to argue with.

Key Specifications

  • Caliber: .308 Winchester
  • Action: Fierce Dual-Lug stainless steel, Remington 700 pattern
  • Barrel: 18" C3 match grade carbon fiber with stainless steel liner
  • Muzzle Thread: 5/8×24
  • Capacity: 3+1, detachable box magazine
  • Trigger: TriggerTech Primary Pro, set at 2.5 lbs, adjustable 1.5 to 4 lbs
  • Stock: Rogue C3 carbon fiber, Glacier finish
  • Metal Finish: Phantom
  • Weight: Starting at approximately 5.8 lbs
  • Accuracy Guarantee: .75 MOA
  • Bolt: Spiral fluted
  • Sling Mounts: QD flush cups
  • Manufacturer: Fierce Firearms
  • Manufacturer Part Number: ROGSCX308WIN18GP
  • UPC: 853418433287

What’s Included

  • Fierce Carbon Rogue XP rifle
  • One detachable box magazine
  • Owner's manual

Frequently Asked Questions

Does the Carbon Rogue XP really come with an accuracy guarantee?

Yes, Fierce backs every Carbon Rogue XP with a .75 MOA three-shot guarantee at 100 yards using quality factory ammo. Independent testing of the Rogue platform has produced groups well under that mark with premium hunting loads. Like any rifle, it will have favorite loads, so it pays to test a few before season.

Is an 18 inch barrel too short for a .308 hunting rifle?

Not at all. The .308 Win is one of the most efficient cartridges for shorter barrels, typically losing only around 20 to 25 fps per inch, so you stay well within ethical hunting velocities at practical ranges. The payoff is a lighter, handier rifle that stays manageable with a suppressor attached.

Can I mount a suppressor on the Fierce Carbon Rogue XP?

Yes, the muzzle is threaded 5/8×24, which is the standard thread pitch for most .30 caliber suppressors and brakes. The 18 inch barrel keeps overall length reasonable even with a can installed, which is a big part of why this configuration is so popular with suppressor users.

What scope mounts fit the Carbon Rogue XP?

The action uses the Remington 700 footprint, so you have a huge range of bases and rings to choose from. Fierce recommends their own ring and base combo or a quality one-piece rail. Torque your ring screws to spec and a dab of thread locker on the base screws is a good idea.

Additional information

UPC

853418433287

Manufacturer

Manufacturer Part Number

ROGSCX308WIN18GP

Reviews

There are no reviews yet.

Be the first to review “Fierce Carbon Rogue XP .308 Win 18″ Bolt Action Rifle Glacier/Phantom”