Description
Burris has been building the Signature line for decades, and there's a reason gunsmiths keep reaching for them. These are the 30mm medium-height rings with a Universal Dovetail base fit, machined from solid steel and wearing a matte black finish that stays low-key on any rifle. The trick that sets them apart is the Pos-Align insert system, a synthetic pivoting collar that sits inside the steel ring so your scope tube gets close to 100 percent contact area instead of the pinch points you feel with conventional rings.
What the Pos-Align Inserts in the Signature Rings Do
Each pair ships with concentric inserts plus a set of offset +/-.010" inserts. The self-centering synthetic material is slightly softer than the anodized finish on your scope tube, so it grips hard without leaving those ugly ring marks that show up when you move a scope around. The pivoting design also cancels out axial misalignment, which means you can mount a scope without stressing the tube even when your receiver holes were drilled a hair off center or your bases sit slightly cockeyed.
Getting the Most From Your 30mm Signature Rings
The offset inserts are the real hidden feature. By swapping which way the inserts face, you can move your point of impact and get close to zero before you ever touch the turrets, saving your internal windage and elevation adjustment for fine tuning. It's a favorite trick for long-range setups and it can make expensive tapered bases or shimming unnecessary. Torque the top rings to 20 inch-pounds and the cross bolts to 30 inch-pounds and you're set.
The medium height holds your optic at .78 inches to center, a good middle-ground for most standard objective bells. These fit standard, dovetail, double-dovetail, and Weaver-style bases, and like the rest of the Burris family they're backed by the Burris Forever Warranty.
Key Specifications
- Manufacturer: Burris
- MPN / Model Number: 420578
- UPC: 000381205780
- Ring Style: Universal Dovetail
- Tube Diameter: 30mm
- Ring Height: Medium
- Height to Center: .78 in.
- Material: Solid Steel
- Finish: Matte Black
- Top Ring Torque: 20 inch-lbs
- Ring Cross Bolts Torque: 30 inch-lbs
- Quantity: Pair (2 rings)
- Base Compatibility: Standard, Dovetail, Double-Dovetail, Weaver-Style
- Warranty: Burris Forever Warranty
What’s Included
- Pair of 30mm Signature Rings, medium height, matte black
- Concentric Pos-Align inserts
- Offset +/-.010" Pos-Align inserts
Frequently Asked Questions
What are the Pos-Align inserts on the Burris Signature Rings for?
The Pos-Align inserts are synthetic collars that sit inside the steel rings and pivot to cradle your scope tube with near-total contact. This grips the scope securely without leaving ring marks and cancels out any misalignment from off-center bases or receiver holes. You get a stress-free, scratch-free mount on nearly any rifle.
Will the medium Signature Rings work with my scope's objective size?
These medium rings hold a 30mm tube at .78 inches to center, which clears the objective on most standard hunting scopes with small to mid-size bells. If you're running a large objective or a setup with a bigger sunshade, you may want to step up to high or extra-high rings for extra clearance. Check the objective diameter against your barrel line before you commit.
How do the offset inserts help me sight in?
The pair includes +/-.010" offset inserts along with the concentric ones. By rotating which direction the inserts face, you can physically shift your point of impact and get close to zero before touching your turrets. That leaves more internal adjustment for dialing at distance and can eliminate the need for tapered bases or shimming.
What bases do the Burris Signature 30mm rings fit?
They use a Universal Dovetail design and will work with standard, dovetail, double-dovetail, and Weaver-style bases. It's a versatile setup that covers a wide range of factory and aftermarket mounting systems. Torque the top rings to 20 inch-pounds and the cross bolts to 30 inch-pounds for a solid hold.




Reviews
There are no reviews yet.