$23.99
22 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Building out a stripped upper receiver comes down to a few key pieces, and this TacFire UPK1 kit rounds up the trio you need to get the front half of your AR-15 running. Inside the package you get a standard charging handle, a complete ejection port dust cover, and a forward assist assembly, all in matching black. It's an easy way to knock out three parts at once instead of hunting them down piece by piece.
The charging handle is your primary way to cycle the bolt and clear the rifle, so a smooth-pulling one matters more than folks give it credit for. The dust cover keeps grit, dirt, and moisture out of the receiver when the rifle is slung or stored, popping open the moment you charge it. The forward assist gives you that extra nudge to seat the bolt fully if fouling or a stubborn round keeps it from going into battery. It's the classic setup you'll find on most standard AR-15 uppers, and it functions the way you'd expect.
TacFire builds this kit from a mix of steel and aluminum, which is exactly the material combo you want for these parts. The charging handle uses aluminum to stay light, while the forward assist and dust cover hardware lean on steel where the wear happens. The black finish keeps everything looking uniform against a standard anodized receiver.
This kit is cut to standard AR-15 dimensions, so it drops into typical mil-spec uppers chambered in the common calibers like 5.56 and .223. If you're assembling a fresh upper or replacing worn or damaged parts on an existing one, having the charging handle, dust cover, and forward assist together in one box takes some of the guesswork out of the job. Grab your roll pins and a punch set and you're ready to go to work.
The kit includes a standard charging handle, a complete ejection port dust cover, and a forward assist assembly. All three parts share a matching black finish. It covers the core hardware for finishing the front end of a stripped AR-15 upper receiver.
It's built to standard AR-15 dimensions, so it fits typical mil-spec upper receivers chambered in common calibers like 5.56 NATO and .223. If your upper is cut for a standard charging handle, forward assist, and dust cover, these parts will drop right in. Uppers built to non-standard specs are always worth double-checking before you order.
Yes, installing the forward assist and dust cover calls for roll pins and a punch set, plus a little patience getting the ejection port spring seated correctly. The charging handle simply slides into place once the bolt carrier group is installed. A basic AR armorer's kit makes the whole job go smoother.
The forward assist lets you manually push the bolt into full lockup if fouling or a tight round keeps it from seating on its own. It's a backup feature you won't reach for often, but it's handy when you do. This kit gives you a functional assembly so your build has that option available.
| UPC | 811261028296 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | UPK1 |
| Model | |
| Product Type | Parts Kit |
You must be logged in to post a review.
Reviews
There are no reviews yet.