Description
Running an LPVO or magnified optic is great until a target pops up at bad-breath distance. That is where the UTG 45 Degree Offset Mount earns its keep. It kicks your RMR-footprint red dot out to the side at a 45 degree cant, so a quick roll of the wrist puts you on a fast close-range aiming point without ever taking your primary optic off the rifle or breaking your cheek weld in any dramatic way. It is one of those simple pieces that changes how a rifle runs once you shoot it a few times.
What the UTG Offset Mount Is Built From
This one is precision CNC-machined from 6061-T6 aircraft-grade aluminum and finished in a matte black anodizing that holds up to weather and handling. UTG went with a low-profile design and cut significant lightening pockets into the body, so it trims weight and bulk while keeping things rigid. All in, it tips the scale right around 1.4 ounces and measures roughly 1.78 inches long, 2.54 inches wide, and 1.02 inches tall, so it disappears on the rail next to your main optic.
Getting the RMR45 Mounted and Zeroed
The base clamps onto any standard Picatinny rail using a Torx locking screw setup, and squared recoil stops keep it locked in place so your dot holds zero shot after shot. UTG includes the RMR mounting screws and the install tools right in the box, which makes for a straightforward setup. A good rule of thumb: snug the #6-48 optic screws to about 12 inch-pounds and the side plate screw to around 35 inch-pounds. One thing worth knowing up front is that the recoil studs mean this mount seats on the right side of the rifle.
Optics That Fit the 45 Degree RMR Mount
If your red dot uses the Trijicon RMR footprint, it drops right on. That covers the RMR itself along with popular RMR-pattern dots like the Holosun 407C and 507C, plus UTG's own OP3 Micro and OP3 Micro SLS. Pair it with a scoped AR and you have got a fast backup sight ready the instant you need it.
Key Specifications
- Manufacturer: Leapers UTG
- Manufacturer Part Number: MT-RMR45
- UPC: 4717385554900
- Model: Picatinny Optic Mount
- Optic Footprint: Trijicon RMR
- Compatible Optics: Trijicon RMR, Holosun 407C/507C, UTG OP3 Micro, OP3 Micro SLS
- Attachment Type: Picatinny
- Material: 6061-T6 Aircraft Aluminum
- Finish: Matte Black Anodized
- Mount Angle: 45 Degree Offset
- Locking Mechanism: Torx Screw with Squared Recoil Stops
- Handedness: Right Side
- Length: 1.78 in
- Width: 2.54 in
- Height: 1.02 in
- Weight: 1.4 oz
What’s Included
- UTG 45 Degree Offset RMR Mount
- RMR mounting screws (#6-48)
- Installation tools
Frequently Asked Questions
What optics fit the UTG 45 degree offset mount?
It uses the Trijicon RMR footprint, so any RMR-pattern red dot bolts right up. That includes the Trijicon RMR, Holosun 407C and 507C, and UTG's own OP3 Micro and OP3 Micro SLS. If your dot shares the RMR mounting pattern, it will fit.
Can I mount the RMR45 on either side of my rifle?
No, this one is designed for the right side only. The squared recoil studs on the base dictate the orientation, so it seats on the right side of the firearm. Keep that in mind when planning your rail layout alongside a primary optic.
Does the UTG offset mount come with the screws and tools I need?
Yes, it ships with the correct #6-48 RMR mounting screws and the install tools right in the box. UTG suggests torquing the optic screws to about 12 inch-pounds and the side plate screw to around 35 inch-pounds. Just be sure to use the included #6-48 screws for the optic so you do not bottom out and damage your red dot.
Will this mount hold zero under recoil?
It is built to. The Torx locking screw base combined with squared recoil stops clamps the mount solidly to the rail and resists shifting under repeated fire. Machined from 6061-T6 aluminum and kept low-profile, it stays rigid so your dot keeps its zero.



Reviews
There are no reviews yet.