Description
This is the Magne-Tech 34mm Magnetic Ring Mount, the Part B (Female) half of their magnetic quick-detach system. It clamps onto a 34mm scope tube and carries three rare-earth magnetic interfaces that mate up with the matching 3-Magnet Picatinny Rail Receiver (Part A, Male), which is sold separately. If you already run the receiver or you're building out a second optic to share one rail base, this is the piece that lets you drop a scope on and off without tools and without chasing your zero around.
The idea here is speed and repeatability. The three magnets on the ring align and clamp against the three on the receiver, each rated at roughly 15 pounds of hold, and a patent-pending dual-redundant locking system keeps everything buttoned down under recoil. Return-to-zero lands within 0.25 MOA after you pull the optic and put it back, which makes this a slick setup for folks switching between a day scope and a thermal or night vision unit, or anyone who just wants the convenience of pulling glass off for transport and storage.
What Sets the Magne-Tech Ring Mount Apart
The ring is machined from 7075-T6 billet aluminum and wears a MIL-A-8625 Type III hard coat anodized finish, so it shrugs off field abuse while staying light at about 6.5 ounces. The 38.5mm rail-to-tube centerline puts most 34mm optics at a comfortable AR-height sight line, and the extended ring footprint gives you some wiggle room to dial in eye relief.
Fitting the 34mm Magnetic Ring Mount
This is strictly the 34mm ring half. To run it you'll need the Magne-Tech 3-Magnet Picatinny Rail Receiver clamped to a MIL-STD-1913 rail. Snug the ring screws to 15 in-lb using the included 2.5mm Allen key, seat your scope, and you're set. It pairs well with popular 34mm optics and plays nice across AR platforms and precision bolt guns alike.
Key Specifications
- Manufacturer: Magne-Tech
- Manufacturer Part Number: 34-65-385-RINGMOUNT
- UPC: 732388500598
- Component: Part B (Female) Ring Mount Only
- Ring Diameter: 34mm
- Rail-to-Tube Centerline Height: 38.5mm
- Material: 7075-T6 Billet Aluminum
- Finish: MIL-A-8625 Type III Hard Coat Anodize
- Mounting System: Rare-Earth Magnetic (3 interfaces, ~15 lb each)
- Locking Mechanism: Patent-Pending Dual-Redundant Locking System
- Return to Zero: Within 0.25 MOA
- Ring Screw Torque: 15 in-lb
- Weight: Approx. 6.5 oz
- Requires: 3-Magnet Picatinny Rail Receiver (Part A, sold separately)
What’s Included
- Magnetic Ring Mount (34mm, Female / Part B)
- 2.5mm Allen Key
Frequently Asked Questions
Does the Magne-Tech 34mm ring mount work on its own?
No, this is the Part B (Female) ring half of the system. It needs the Magne-Tech 3-Magnet Picatinny Rail Receiver (Part A, Male) to function, and that receiver is sold separately. If you already own the receiver, this ring drops right into it.
What size scope tube does this Magne-Tech ring mount fit?
It's built for 34mm scope tubes. The rail-to-tube centerline sits at 38.5mm, which puts most 34mm optics at a comfortable AR-style height. Torque the ring screws to 15 in-lb with the included 2.5mm Allen key when you seat your scope.
Will it really hold zero after I pull the scope off and put it back?
Yes, that's the whole point of the magnetic design. Three rare-earth magnets and a dual-redundant locking system give you a return-to-zero within 0.25 MOA after each reattachment. It's a popular choice for anyone swapping between day optics and thermal or night vision.
What's the Magne-Tech ring mount made of?
It's machined from 7075-T6 billet aluminum and finished with a MIL-A-8625 Type III hard coat anodize. That combination keeps it light at around 6.5 ounces while standing up to rough field use.




Reviews
There are no reviews yet.