Description
There are switch barrel rifles, and then there is the Kraken. Cadex built this one around a patented barrel change system that torques the barrel from the breech side with a dedicated tool, and the result is one of the smallest point of impact shifts of any multi-caliber platform out there. Pull a barrel, put it back on, and your zero stays close enough that you can log the offset in your ballistics app and get right back to work. A single screw holds the detachable magazine base, so swapping between short and long action cartridges takes minutes, not a trip to the gunsmith.
A 338 Lapua Kraken Built for Real Distance
This configuration comes chambered in 338 Lapua Magnum with a 27 inch match grade Bartlein barrel wearing a Black DLC finish. Cadex uses 5R single point cut rifling across the line, which is easier on bullets and easier to clean, and the muzzle is threaded so you can run a brake or hang a suppressor. The 416 stainless action is a heavy duty custom grade design with an integral recoil lug and a three lug bolt with a short 60 degree throw, so cycling stays quick even under a low mounted scope. Feeding comes from a 5 round detachable magazine for 5+1 on tap.
Chassis Details That Earn Their Keep
The Hybrid Tan chassis brings a full length Picatinny top rail with built-in elevation for stretching the 338 way out, plus an M-LOK handguard for bipods, weights, and whatever else your setup calls for. The reverse folding buttstock is fully adjustable, locks up without rattle, and shields the bolt handle when folded for compact transport. Cadex's DX2 Evo trigger is a standout too. You can run it as a single stage or double stage and dial the pull weight between 1.5 and 2.5 pounds, so it adapts to you rather than the other way around.
Cadex gear runs with military and law enforcement units around the world, and the Kraken is the same class of hardware in a package you can grow into with additional barrels down the road. For ELR matches, big country hunts, or just ringing steel at distances that make your buddies double check the rangefinder, this rifle is built for the job.
Key Specifications
- Manufacturer: Cadex Inc
- Model: CDX-MC Kraken
- Manufacturer Part Number: CDXMCKRKN33827BR30I2D3
- UPC: 842940111763
- Action: Bolt Action, 3-lug bolt with 60 degree throw
- Caliber: .338 Lapua Magnum
- Capacity: 5+1, detachable magazine
- Barrel Length: 27"
- Barrel: Bartlein match grade, 5R single point cut rifling, threaded muzzle
- Barrel Finish: Black DLC
- Receiver: 416 stainless steel with integral recoil lug, Hybrid Tan finish
- Trigger: DX2 Evo selectable single/two stage, 1.5 to 2.5 lb adjustable
- Top Rail: Full length Picatinny, 30 MOA
- Handguard: M-LOK
- Stock: Hybrid Tan adjustable reverse folding buttstock
What’s Included
- Cadex CDX-MC Kraken rifle
- One 5-round detachable magazine
- MX1 muzzle brake
Frequently Asked Questions
Can I add other calibers to the CDX-MC Kraken later?
That is the whole point of this platform. The Kraken supports conversion barrels in chamberings like 6 Creedmoor, 6.5 Creedmoor, 308 Win, 300 PRC, 300 Norma Mag, and more, available separately from Cadex. A single screw secures the detachable magazine base, so you can move between short and long action cartridges, and the barrel swaps with a dedicated breech-side torque tool in just a few minutes.
Do I lose my zero when swapping barrels on the Kraken?
Not in any meaningful way. Cadex designed this system specifically to minimize point of impact shift between takedown and reassembly of the same barrel, with shift typically under 0.1 mil. Most owners log the small offset for each barrel in their ballistics software and skip re-zeroing entirely.
Is the CDX-MC Kraken suppressor ready?
Yes. The 27 inch barrel comes with a threaded muzzle, so you can run the included brake or mount a suppressor. The heavy straight taper barrel profile with barrel band also supports slip-on suppressor setups.
What kind of trigger does this rifle use?
It ships with the Cadex DX2 Evo, which you can configure as either a single stage or a two stage trigger. Pull weight adjusts between 1.5 and 2.5 pounds, and the trigger module can be removed for maintenance without pulling the action from the chassis, so your zero stays put.




Reviews
There are no reviews yet.