Description
There are lightweight hunting rifles, and then there are rifles like the CT Rival XP 2.0, where Fierce went after weight everywhere it could without giving up rigidity. The receiver is machined from titanium with a dual-lug design, precision-cut raceways, and a Remington 700-pattern footprint, then finished in a Distressed Gray Cerakote that looks as good as it wears. Bolt lift is a short 70 degrees, so you get fast cycling and plenty of knuckle clearance under a big hunting scope, and the spiral-fluted bolt carries a DLC coating that keeps it running slick in dusty, wet, or freezing conditions.
Why the CT Rival XP 2.0 Shoots the Way It Does
The 20 inch C3 match grade barrel is a hand-lapped stainless liner wrapped in high-modulus carbon fiber, which keeps the barrel stiff and helps shed heat while trimming a bunch of weight off the front end. Fierce backs the combination with a half MOA accuracy guarantee out of the box, and the chambering does its part too. The 7mm PRC is built for long, sleek, high-BC bullets, giving you flat trajectories and plenty of authority on elk and mule deer well past normal hunting distances. A titanium NIX side-port muzzle brake comes installed on the threaded muzzle to tame recoil, and the TriggerTech Primary Pro arrives set at 2.5 pounds with a user-adjustable range of 1.5 to 4 pounds.
Living With the Rival XP 2.0 in the Field
The Carbon Matrix finished C3 carbon stock is where the 2.0 updates really show. A push-button adjustable cheek piece lets you set proper eye alignment behind your scope in seconds, no tools needed, and the vertical palm swell grip puts your hand in a natural, repeatable position. Feeding comes from a detachable drop box magazine with 3+1 capacity, which makes loading and unloading at the truck quick and simple. Add the two-position safety and drilled and tapped receiver, and this is a rifle you can set up once and trust for seasons of backcountry work.
Key Specifications
- Manufacturer Part Number: RIVTCX7PRC20DGM
- UPC: 853418438763
- Caliber: 7mm PRC
- Action: Fierce Dual-Lug Titanium, Bolt Action (700-pattern footprint)
- Barrel: 20" C3 Match Grade Carbon Fiber, Threaded Muzzle
- Muzzle Device: Titanium NIX Side-Port Muzzle Brake (included)
- Capacity: 3+1, Detachable Drop Box Magazine
- Trigger: TriggerTech Primary Pro, Set at 2.5 lbs, Adjustable 1.5-4 lbs
- Stock: Rival XP C3 Carbon Fiber, Carbon Matrix Finish, Push-Button Adjustable Cheek Piece
- Receiver Finish: Distressed Gray Cerakote, Drilled & Tapped
- Bolt: Spiral Fluted, DLC Coated, 70-Degree Throw
- Safety: Two-Position
- Accuracy Guarantee: 1/2 MOA
- Hand: Right Hand
What’s Included
- Fierce CT Rival XP 2.0 rifle
- Detachable drop box magazine (1)
- Titanium NIX side-port muzzle brake (installed)
Frequently Asked Questions
How accurate is the Fierce CT Rival XP 2.0?
Fierce backs this rifle with a half MOA accuracy guarantee straight from the factory. The C3 match grade carbon barrel uses a hand-lapped stainless steel liner, and the titanium action is machined to tight tolerances for consistent lockup. Feed it quality match or premium hunting ammo and it will hold up its end of the deal.
Can I mount a scope on the CT Rival XP 2.0, and what rings or bases fit?
Yes, the titanium receiver comes drilled and tapped and follows the Remington 700 footprint, so the huge selection of 700-pattern bases and rails will work. The 70-degree bolt throw also gives you extra clearance for larger objective scopes with big turrets, which is handy for long-range glass.
Is the TriggerTech trigger on the Rival XP 2.0 adjustable?
It is. The TriggerTech Primary Pro comes factory set at 2.5 pounds and can be adjusted by the user anywhere from 1.5 to 4 pounds. It breaks clean with essentially zero creep, which is a big part of why this rifle shoots so well from field positions.
Can I run a suppressor on this rifle instead of the muzzle brake?
The barrel is threaded, and the included titanium NIX side-port brake simply threads off so you can swap on a suppressor or thread protector. Just confirm your suppressor mount matches the barrel's thread pitch, and keep in mind your point of impact can shift slightly when you change muzzle devices, so re-zero before hunting.



Reviews
There are no reviews yet.