Description
The RPM Bravo 34mm Cantilever Mount takes the guesswork out of getting your optic straight. Ruff's Precision Manufacturing built a co-linear bubble level directly into the mount, so the reference is right there in your sightline. You can glance at it with your non-dominant eye from the shooting position, which means you catch any cant before you send it instead of after the group opens up. The same level does double duty during install, giving you a clear read on rifle tilt while you torque things down and skipping the balancing act of clamping tiny levels all over the receiver.
What Sets the Bravo 34mm Mount Apart
This is a one-piece cantilever built for 34mm main tubes with a 1.50-inch height to the center of the optic, a common setup for precision bolt guns and larger-format ARs where you want the scope sitting up over a taller comb or magnified glass. The forward cantilever design pushes the rings ahead of the receiver to help you nail proper eye relief on a Picatinny rail. The Flat Dark Earth finish gives it a low-key look that pairs well with tan and multi-tone builds.
Materials and Hold on the Bravo Cantilever
The body and cap are machined from 6061-T6 aluminum, and the cross bolt and hardware are 303 stainless steel with a 1/2-inch nut. An integrated recoil lug keys into the rail to fight movement under heavy recoil, and a top ring alignment lug keeps the caps lined up with the base during install so your rings seat true. It's proudly made in the USA. For setup, RPM lists 18 in/lbs on the cap screws and 45 in/lbs on the cross bolt, so a good torque wrench and a dab of thread locker on the cross bolt threads will get you dialed and keep it there.
Key Specifications
- Manufacturer: Ruff's Precision Manufacturing
- Manufacturer Part Number: BC-34150-FDE
- UPC: 850063702171
- Ring Diameter: 34mm
- Mount Height: 1.50" to center of optic
- Style: One-piece cantilever
- Finish: Flat Dark Earth (FDE)
- Body Material: 6061-T6 aluminum
- Hardware: 303 stainless steel cross bolt & nut (1/2")
- Rail Fit: Picatinny
- Bubble Level: Integrated co-linear
- Recoil Lug: Integrated
- Cap Screw Torque: 18 in/lbs
- Cross Bolt Torque: 45 in/lbs
- Weight: Approx. 6.0 oz
- Origin: Made in USA
What’s Included
- RPM Bravo Series 34mm cantilever scope mount with integrated co-linear bubble level
- Ring caps with mounting hardware
Frequently Asked Questions
What size scope tube does the RPM Bravo 34mm mount fit?
This mount is built for optics with a 34mm main tube, which covers a lot of popular first focal plane and long-range scopes. It sets the center of the optic at 1.50 inches over the rail, a solid height for taller combs and larger objective bells. If your scope has a 30mm or 35mm tube, RPM makes the Bravo in those sizes too.
How does the co-linear bubble level on the Bravo mount work?
The level is machined right into the mount and sits in line with your optic, so you can read it with your non-dominant eye from behind the rifle. That lets you confirm the gun isn't canted before the shot without adding a separate clamp-on level. It also makes leveling the scope during install much easier since you have a built-in reference for rifle tilt.
Will the RPM Bravo cantilever mount fit a standard Picatinny rail?
Yes, it clamps to a Picatinny rail and uses an integrated recoil lug that keys into the slots to fight movement under recoil. The 303 stainless cross bolt and 1/2-inch nut lock it down tight. RPM recommends 45 in/lbs on the cross bolt and a touch of thread locker for peace of mind.
What torque specs should I use when mounting a scope in the Bravo mount?
RPM calls for 18 in/lbs on the ring cap screws and 45 in/lbs on the cross bolt. A quality torque wrench is worth using here so you don't over-crush the tube or leave things loose. The top ring alignment lug helps keep the caps square to the base as you tighten everything evenly.





Reviews
There are no reviews yet.