0
0

RPM CLR-34100 Precision 34mm Medium 1.00″ Scope Rings, Black

UPC: 850063702041

$174.99

30 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Getting a scope mounted dead level usually means juggling a couple of small bubble levels, some painter's tape, and a lot of squinting. The RPM CLR-34100 does away with that circus. This 34mm medium ring set has a co-linear bubble level built right in, positioned so you can read it with your non-dominant eye while you're behind the glass. That means you can catch cant before you break the shot, which matters more than most folks realize once the distances stretch out past a few hundred yards.

What the Co-Linear Level on the CLR-34100 Actually Solves

Cant is one of those quiet accuracy killers. A rifle that's tilted even a few degrees will throw your point of impact off target the farther you shoot, and you often won't notice until you're already chasing misses. The built-in level here gives you a constant reference during both mounting and shooting, so there's no need to bolt on a separate anti-cant device or balance a bubble on the tube while you torque everything down. Level the rifle, level the scope, snug the caps, and you're set.

Build and Fit on the RPM 34mm Medium Rings

These are machined in the USA with the kind of tolerances that keep a scope from creeping under recoil. The ring body and cap are aluminum, the cross bolt and nut are 303 stainless in a half-inch size, and there's an alignment lug that keeps the cap and base squared up while you run the cap screws. The medium height sets the center of your scope tube at 1.00 inch off the base, a versatile spot that clears most objective bells on mid-size glass. They clamp to a standard Picatinny rail.

Dialing In the CLR-34100

RPM lists recommended torque values of 18 in-lbs on the cap screws and 45 in-lbs on the cross bolt, and those numbers are printed right on the packaging instead of some tiny slip of paper you'll lose. Reach for a quality inch-pound wrench, go in a crossing pattern on the caps, and check your ring gaps stay even side to side. Shooters running this set consistently mention how solid the build feels and how much easier the integrated bubble makes mounting.

Key Specifications

  • Manufacturer: Ruff's Precision Manufacturing (RPM)
  • Model / MPN: CLR-34100
  • UPC: 850063702041
  • Ring Diameter: 34mm
  • Height: Medium, 1.00" tube center height
  • Special Feature: Integrated co-linear bubble level
  • Ring Body & Cap Material: Aluminum
  • Cross Bolt & Nut: 303 stainless steel, 1/2"
  • Base Compatibility: Picatinny rail
  • Cap Screw Torque: 18 in-lbs
  • Cross Bolt Torque: 45 in-lbs
  • Finish / Color: Black
  • Weight: 4.5 oz (set)
  • Country of Origin: Made in USA
  • Quantity: Set of 2 rings

What’s Included

  • Two (2) 34mm medium-height scope rings with integrated co-linear bubble level
  • Cross bolt and nut hardware (303 stainless)
  • Cap screws

Frequently Asked Questions

How does the bubble level on the CLR-34100 work while I'm shooting?

The co-linear level is positioned so you can read it with your non-dominant eye while you're behind the scope. That lets you check your rifle's cant right before the shot without lifting your head off the stock. It doubles as a mounting aid too, so you don't need a separate level clamped to the tube.

What torque specs does RPM recommend for these rings?

Ruff's Precision lists 18 in-lbs on the cap screws and 45 in-lbs on the 1/2-inch cross bolt. Those values are printed on the packaging for easy reference. Use a quality inch-pound torque wrench and tighten the caps in a crossing pattern to keep even ring gaps.

Will the CLR-34100 clear my objective bell at medium height?

The medium option sets your scope tube center at 1.00 inch above the base, which clears most mid-size objectives on common 34mm scopes. Very large objective bells or bulky throw levers may want the high 1.25-inch version instead. Measuring your scope's objective radius against the rail is the surest way to confirm fit.

What rail do these RPM 34mm rings mount to?

They're built for a standard Picatinny rail and use a 303 stainless cross bolt to clamp down. An alignment lug keeps the cap and base squared up while you run the cap screws. That combination helps the set hold zero under recoil once it's torqued properly.

Additional information

UPC

850063702041

Manufacturer

Manufacturer Part Number

CLR-34100

Shipping Weight

0.464

Reviews

There are no reviews yet.

Be the first to review “RPM CLR-34100 Precision 34mm Medium 1.00″ Scope Rings, Black”