0
0

Talley Modern Sporting Scope Rings 30mm High FDE Picatinny

UPC: 810301027527

$96.99

7 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Talley built the Modern Sporting (TMS) line to do one thing really well: get your 30mm scope mounted to a MIL-STD-1913 Picatinny rail with zero fuss and no wobble. These are fully CNC machined from lightweight aircraft-grade aluminum alloy, then dressed in a Flat Dark Earth finish that plays nice with FDE rifles and neutral setups alike. The high profile gives you the extra clearance you need when you're running a bigger objective bell or want room for iron sight co-witness on a modern sporting rifle.

Why the High Profile TMS Rings Earn Their Keep

Ring height matters more than folks give it credit for. Going high positions a 30mm tube up off the rail far enough to clear large objective lenses, which is exactly what you want with a big variable optic or a setup where the bell would otherwise crowd the rail. If you're mounting a scope with a 56mm objective on a picatinny rail, high is usually the height that keeps everything breathing. It's also a solid pick when you want a taller, heads-up cheek weld on an AR platform.

Getting Your Talley TMS Rings Torqued Right

Installation is refreshingly simple. The cap screws that clamp your scope tube want roughly 15 to 20 inch-pounds, and Talley recommends not exceeding your scope maker's torque spec on the main tube to avoid marking it. The locking plate that grabs the rail can go up to 25 inch-pounds, which is plenty for any caliber when your rail and rings are both within picatinny spec. Talley says skip the Loctite here too. Torqued properly, these rings hold zero and stay put.

Where the Flat Dark Earth Rings Fit In

Between the machined alloy build and the FDE finish, these rings hit that sweet spot of durable, good-looking, and easy on the wallet. Talley has been turning out precise scope rings for over 40 years, and the TMS line brings that reputation to a clean picatinny mount that works on ARs, bolt actions, and just about anything wearing a 1913 rail. Match the height to your objective, torque to spec, and you're ready to zero.

Key Specifications

  • Manufacturer: Talley
  • Manufacturer Part Number: TMS30H-FDE
  • UPC: 810301027527
  • Tube Diameter: 30mm
  • Ring Height: High
  • Finish/Color: Flat Dark Earth (FDE)
  • Material: Aircraft-Grade Aluminum Alloy, CNC Machined
  • Mount Type: Picatinny (MIL-STD-1913)
  • Design: Two-Piece Ring Set
  • Cap Screw Torque: 15-20 in-lbs
  • Locking Plate Torque: Up to 25 in-lbs
  • Shipping Weight: 2.8 oz

What’s Included

  • One pair (2) Talley Modern Sporting 30mm high scope rings
  • Ring cap screws and locking plate hardware

Frequently Asked Questions

Will the Talley Modern Sporting rings fit my rail?

These rings are designed to clamp onto any rail built to MIL-STD-1913 Picatinny specs, which covers most AR-15s, modern sporting rifles, and bolt guns running a picatinny rail. As long as your rail is within spec, you're good to go. They mount as a clean two-piece set that locates and secures the optic for consistent alignment.

Do I need the high profile or would medium work for my scope?

High is the way to go when you're running a larger objective bell, generally scopes with 56mm objectives on a 30mm tube, or when you want extra clearance and a taller cheek weld. Medium tends to be plenty for objectives up to around 50mm on a sporter barrel. If your objective bell would crowd the rail with a shorter ring, step up to high.

What torque should I use when installing these Talley TMS rings?

The ring cap screws that clamp your scope tube want about 15 to 20 inch-pounds, and you should never exceed your scope manufacturer's stated max torque on the main tube. The locking plate that grabs the rail can be torqued up to 25 inch-pounds. Talley advises against using Loctite on these, since properly torqued screws won't back out.

Are these Talley rings a matched pair or a single ring?

This is a complete two-piece set, so you get both rings needed to mount your optic. Each package includes the pair along with the cap screws and locking hardware. That's everything you need to get a 30mm scope on the rail.

Additional information

UPC

810301027527

Manufacturer

Manufacturer Part Number

TMS30H-FDE

Shipping Weight

2.8

Reviews

There are no reviews yet.

Be the first to review “Talley Modern Sporting Scope Rings 30mm High FDE Picatinny”