$1,650.00
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The original Maverick earned its reputation the hard way, racking up more PRS wins than any other suppressor out there. The Gen 2 takes that proven concept and rebuilds it from the ground up. This L-length 30 cal version is a fully welded titanium stack with a magnum rating, so it handles everything from a 6 Dasher match rifle to a hard-kicking magnum hunting rig without breaking a sweat. Area 419 reworked the internal geometry with venting ports and better forward gas flow, which makes this generation quieter than the Gen 1 while still feeding the brake enough gas to do its job.
The big idea behind the Maverick has always been having it both ways: real suppression when you want quiet, and real muzzle control when you want to spot your own impacts. With the included Gen 2 brake threaded on the front, you keep the same vertical control the Gen 1 was known for while cutting linear recoil by roughly 9% compared to the old brake. Pull the brake, cap it off, and you have a legit precision can for hunting or training. Same unit, two personalities.
The rear of the Gen 2 carries a standard 1.375×24 HUB thread, which opens up the whole world of mounting options. This package ships set up with a Hellfire HUB adapter and a 5/8×24 Hellfire universal muzzle adapter, so it drops right onto most 30 cal precision barrels. Prefer direct thread or a different quick-detach system? Swap the rear adapter and go. Left-hand threading on the Hellfire mount means the system stays tight instead of walking loose during a long match.
This is the suppressor for the PRS or NRL competitor who is tired of choosing between a brake and a can, and for the precision hunter who wants one do-it-all muzzle device. The L length gives you the most volume in the lineup for the quietest performance the platform offers. It is not the cheapest way to quiet down a rifle, but it is one of the most versatile, and the trophy count behind this design speaks for itself.
The Gen 2 moves to a fully welded titanium stack with a standard HUB rear thread, so you can run just about any mounting system you like. Area 419 also redesigned the internals with venting ports and improved gas flow, making it quieter than the Gen 1 while the new Gen 2 brake cuts linear recoil by about 9% compared to the original brake with the same vertical control.
Yes, that is the whole point of the design. Swap the brake for the included end cap and it runs as a traditional precision suppressor, which is a great setup for hunting or training. Thread the brake back on for matches when you want maximum muzzle control and the ability to spot your own impacts.
It carries a magnum rating, so it covers the full spread of popular precision cartridges from 6mm and 6.5mm rounds up through 308 Win, 300 PRC, and other 30 cal magnums. The L length gives you the most internal volume in the Gen 2 lineup, which translates to the quietest performance the platform offers.
Most likely. The rear of the can uses a standard 1.375×24 HUB thread, so it accepts Area 419's Hellfire and Sidewinder adapters along with direct thread and quick-detach mounts from other HUB-compatible makers. This one ships ready to go with a Hellfire HUB adapter installed and a 5/8×24 universal muzzle adapter in the box.
| UPC | 810080184688 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 419-MAV2-30L |
| Caliber/Gauge | 30 Cal |
| Thread Pattern | 5/8"x24 |
You must be logged in to post a review.
Reviews
There are no reviews yet.