Description
The Trijicon Compact ACOG 2×20 packs the legendary ACOG reputation into one of the smallest magnified optics the brand makes. This model runs a dual-illuminated green .223 RTR reticle calibrated for 55gr .223 Remington, and it does the whole job without a single battery. Tritium and fiber optics work together to power the reticle, automatically dialing brightness up or down based on the light around you. Step outside into blazing sun or duck into a dim room and the aiming point stays visible, no buttons to fumble and nothing to switch on when seconds matter.
Why the Compact ACOG 2×20 Earns Its Spot on Tight Builds
The 2x magnification and 20mm objective were sized on purpose for platforms where space and weight are at a premium. Think pistol-caliber carbines, submachine gun builds, and short compact rifles where a full-length optic just gets in the way. You get a real step up in target detection over an open sight while keeping the package trim. Trijicon rates the ACOG line to survive recoil from .22LR all the way up to .50BMG, so durability is never the concern here.
The Green .223 RTR Reticle and Bindon Aiming Concept
The RTR reticle is a bullet-drop-compensating, target-ranging design that lets you hold for distance without guesswork. Because it is a fixed-power optic, both eyes stay open naturally using Trijicon's Bindon Aiming Concept, which keeps your peripheral awareness intact while the magnified image floats in for a precise shot. Adjustments run at 0.5 MOA per click with a forged aluminum housing and matte black finish that shrugs off abuse. Owners routinely report tens of thousands of rounds with the zero never budging.
Mounting the Compact ACOG 2×20 with Q-LOC
The included Q-LOC mount is a genuinely nice touch. It's a Mil-Spec drop-test-rated 6061-T6 aluminum design with a one-handed, tool-less lever, and the spring-loaded setup holds retention and zero even when the knobs aren't fully cranked. It clamps to any Mil-Spec or NATO Picatinny rail and delivers repeatable return-to-zero if you ever pull it off and put it back. Made in the USA, this is the kind of optic you set up once and forget about.
Key Specifications
- Manufacturer: Trijicon
- Model: Compact ACOG (TA47-C-400416)
- Manufacturer Part Number: 400416
- UPC: 719307624757
- Magnification: 2x fixed
- Objective Diameter: 20mm
- Reticle: Dual Illuminated Green 55gr .223 RTR
- Caliber Calibration: .223 Rem / 55gr
- Illumination Source: Fiber Optics & Tritium (battery-free)
- Bullet Drop Compensating (BDC): Yes
- Bindon Aiming Concept (BAC): Yes
- Adjustment: 0.5 MOA per click
- Eye Relief: 2.1 in. (53.34mm)
- Exit Pupil: 0.39 in. (9.91mm)
- Field of View: 5.6 degrees / 29.34 ft. @ 100 yds
- Housing Material: Forged Aluminum
- Finish: Matte Black
- Mount: Trijicon Q-LOC Technology Mount
- Country of Origin: Made in the USA
What’s Included
- Trijicon Compact ACOG 2×20 riflescope
- Trijicon Q-LOC Picatinny mount
- ACOG manual
- Warranty card
Frequently Asked Questions
Does the Compact ACOG 2×20 use batteries?
No, and that's one of its biggest selling points. The reticle is powered by a combination of tritium and fiber optics, so it's always on and always ready. Brightness adjusts automatically to the light around you, which means there's nothing to switch on and nothing to die at the wrong moment.
What kind of firearm is this Compact ACOG 2×20 best suited for?
It was purpose-built for compact platforms where space is tight, like pistol-caliber carbines, submachine gun builds, and short rifles. The 2x magnification and small footprint make it ideal for close to medium range work out to roughly 150 to 200 meters. If you want a magnified optic that won't add bulk to a small gun, this is the sweet spot.
What does the green .223 RTR reticle do?
The RTR reticle is a bullet-drop-compensating and target-ranging design calibrated for 55gr .223 Remington. It lets you hold for distance without dialing, and the green illumination shows up well against most backgrounds. The dual-illumination system keeps it visible in bright sun and low light alike.
Do I need extra parts to mount the Compact ACOG 2×20?
No, the Q-LOC Picatinny mount is included in the box. It uses a one-handed, tool-less lever and clamps to any Mil-Spec or NATO rail. The spring-loaded design holds zero and retention even when the knobs aren't fully tightened, and it returns to zero reliably if you remove and reattach it.





Reviews
There are no reviews yet.