$461.99
8 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The 18-inch length is the sweet spot a lot of precision builders chase. You get a real velocity bump over a 16-inch, which translates to a flatter trajectory and better performance stretching out past a few hundred yards, without carrying the weight and clumsiness of a full 20-inch setup. Noveske cuts this one from 416R stainless steel and pairs a 1:7 twist with their improved polygonal rifling, so it spins up heavier match projectiles like 69 and 77 grain loads the way they were meant to run.
The heart of this barrel is the proprietary 5.56 Noveske Match chamber, hand-polished to tighten up how the bullet meets the throat while keeping NATO body dimensions for reliable feeding. Quality control at Noveske isn't a quick glance on the way out the door either. Every piece of stock gets tracked and inspected through each step of manufacturing, and each finished barrel is individually serialized. It carries a medium contour and a bead-blasted finish, and the M4-style barrel extension with extended feed ramps keeps rounds chambering smoothly under speed.
This one runs an intermediate-length gas system, which sits about an inch and a half shorter than a full rifle-length setup. It smooths out the recoil impulse nicely and helps you stay on target for faster follow-ups. The barrel ships with the pinned .750" low-profile gas block already installed, along with the matched gas tube and dowel pin. Worth knowing before you order: this is designed for Noveske's 1-inch gas block, so a standard 1.9-inch front sight base won't fit under it.
Muzzle threads are the standard 1/2×28, so it takes just about any common flash hider, comp, or suppressor mount you want to hang on it. Between the match chamber, the stainless construction, and Noveske's reputation for consistency, this is a barrel built to anchor a serious SPR or designated marksman style rifle. Getting the gas block final-fit and the barrel installed is a job best handed to a qualified gunsmith.
This barrel is built for precision-focused AR-15 setups, the classic Special Purpose Rifle or designated marksman style rifle. The 18-inch length maximizes velocity from the 5.56 cartridge for a flatter trajectory at extended range, while the match chamber and stainless construction lean toward accuracy. It's a strong pick if you want more reach than a 16-inch carbine without stepping up to a full 20-inch.
Yes. It ships with Noveske's pinned .750" low-profile gas block installed, plus the matched intermediate-length gas tube and dowel pin. Keep in mind this barrel is designed specifically around Noveske's 1-inch gas block, so a standard 1.9-inch front sight base won't fit under it.
The 1:7 twist is ideal for stabilizing heavier match projectiles, think 69 to 77 grain loads that precision shooters tend to favor. It will still run lighter 55 grain ammo just fine for practice, but you'll see the barrel's accuracy potential shine with quality heavier match ammunition.
Installation of the barrel and final fitting of the gas block and dowel pin is best left to a qualified gunsmith. Getting the headspace and gas block alignment right is important for reliable function and safety, so unless you have the tools and experience, hand it off to a pro.
| UPC | 840906104590 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 07000056 |
| Barrel Length | 18" |
| Caliber/Gauge | .223 REM/5.56 NATO |
| Color | Silver |
| Model | |
| Product Type | Barrel |
You must be logged in to post a review.
Reviews
There are no reviews yet.