0
0

KAK Industry K-SPEC Enhanced BCG 5.56/300 BLK Dual Ejector Chrome

UPC: 811163036597

$233.96

32 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The KAK K-SPEC Enhanced BCG is one of those parts that quietly solves a bunch of problems at once. If you've ever run a suppressor and gotten a face full of gas, or fought with a dirty gun that started short-stroking, this carrier group was built with you in mind. It's a genuine plug-and-play swap that drops right into a standard AR-15 upper, no gas system retuning required, and it's chambered to run both 5.56 NATO and .300 Blackout.

What Sets the K-SPEC Apart

Three features do the heavy lifting here. The dual ejector system uses standard mil-spec ejectors and springs, so there's nothing proprietary to source later, and the ejector holes are centered on the lugs so bolt strength isn't compromised. Two ejectors mean more consistent, reliable brass ejection when the gun is running hot, wet, or filthy. The side vent ports bleed off excess gas so less of it comes back toward you, which suppressed and left-handed shooters tend to appreciate the most. Then there are the sand-cutter rails, angled cuts machined into the carrier that push carbon and grit into non-critical areas away from the receiver so the bolt keeps cycling in sand, mud, and heavy suppressor fouling.

Materials and Build Quality

KAK machines this entire BCG in-house at their Missouri facility, and the material spec is legit. The carrier is 8620 steel with rails, bolt runs, and gas bores ground to .0002 tolerances, then hard chromed. The bolt is C158 steel, shot peened, MPI tested, and hard chromed. The firing pin is 8740 steel, Swiss turned and chrome plated, the cam pin is 4140, and the ejectors are tough S7 tool steel. The 4130 gas key is torqued with T25 fasteners and hydraulically staked, so it stays put. It's cut to the M16 full auto profile and weighs in at a standard 11.5 oz.

Who Should Grab One

This is a strong pick for anyone building a suppressed rifle, a truck gun that lives in the dirt, or a workhorse that just needs to run no matter what. The full chrome finish wipes clean easily and looks sharp doing it. Pair it with a quality upper and you've got a carrier that's ready to shrug off the abuse.

Key Specifications

  • Manufacturer: KAK Industry
  • Model: K-SPEC Enhanced
  • Manufacturer Part Number: MO-425-3305-007
  • UPC: 811163036597
  • Caliber: 5.56 NATO / .300 Blackout
  • Product Type: Bolt Carrier Group
  • Profile: M16 Full Auto
  • Carrier Material: 8620 Steel, Hard Chrome
  • Bolt Material: C158 Steel, Shot Peened, MPI Tested, Hard Chrome
  • Firing Pin: 8740 Steel, Chrome Plated
  • Ejectors: S7 Tool Steel, Dual Ejector
  • Gas Key: 4130 Steel, T25 Torqued, Hydraulically Staked
  • Finish / Color: Full Chrome / Silver
  • Vent Type: Side Vent
  • Weight: 11.5 oz
  • Origin: Made in USA

What’s Included

  • KAK K-SPEC Enhanced Bolt Carrier Group (complete assembly with bolt, carrier, firing pin, cam pin, and gas key)

Frequently Asked Questions

Does the KAK K-SPEC BCG work with both 5.56 and .300 Blackout?

Yes. This K-SPEC is built to run both 5.56 NATO and .300 Blackout out of a standard AR-15 upper. It's cut to the M16 full auto profile, so it drops right in and cycles both cartridges without any special setup.

Do I need to retune my gas system if I run a suppressor with the K-SPEC?

No, that's the whole point of the design. The K-SPEC is a plug-and-play carrier that requires no additional tuning of the gas or recoil systems when you add a suppressor. The side vent ports also help dump extra gas so less blowback comes back toward your face.

What are the sand-cutter rails on the K-SPEC actually for?

Those are the angled cuts machined into the carrier rails. They push carbon fouling, grit, and debris into non-critical areas that don't contact the receiver, so the bolt keeps cycling reliably in sand, mud, and heavy suppressor fouling. It's a real advantage for guns that see rough conditions or long strings of fire.

Does the dual ejector setup use special parts?

No proprietary parts here. The K-SPEC dual ejector system uses standard mil-spec ejectors and springs, so replacements are easy to find down the road. The two ejectors give you more consistent, reliable brass ejection, especially when the gun is dirty or running hot.

Additional information

UPC

811163036597

Manufacturer

Manufacturer Part Number

MO-425-3305-007

Color

Silver

Model

Product Type

Bolt Carrier

Reviews

There are no reviews yet.

Be the first to review “KAK Industry K-SPEC Enhanced BCG 5.56/300 BLK Dual Ejector Chrome”