Description
This is the factory optic plate you want if your Dan Wesson came optics-ready and you're running a Trijicon RMR, SRO, or one of the many dots that share that footprint. It bolts directly to the slide cut on your 1911, DWX, or DWX Compact and gives your red dot a machined, purpose-built surface to sit on. No milling, no sending your slide off to a gunsmith, just a clean drop-in that lines up the way it should.
What the Plate 1 Footprint Covers
The number system on Dan Wesson's plates matters, and Plate 1 is the RMR/SRO version. That opens the door to a huge lineup of popular optics, since the RMR pattern is one of the most widely copied footprints out there. Trijicon's RMR and SRO drop right in, and plenty of Holosun dots like the 407C, 507C, 507Comp, and 508T ride the same pattern. If your dot lists an RMR footprint, this is the plate for it. Just note that some Holosun models may need slightly shorter mounting screws depending on your setup.
Getting Your Dan Wesson Optic Plate Dialed In
Fitment is the whole point here, and being the OEM piece means it's cut to match the contour of the slide instead of forcing an aftermarket compromise. It ships with the correct hardware to fasten the plate to the slide. For install, a quality torque driver is your friend, and blue Loctite on the optic screws is the move to keep everything from backing out under recoil. Take your time prepping threads, torque to spec, and this thing stays put.
Once it's mounted, you've got a stable, repeatable platform that treats your red dot like it belongs there. That's what makes the difference between a dot that wanders after a few range trips and one that holds zero through serious round counts, whether you're shooting matches, carrying, or just putting in reps at the range.
Key Specifications
- Manufacturer: Dan Wesson
- Manufacturer Part Number: 19271
- UPC: 806703192710
- Plate Number: Plate 1
- Optic Footprint: Trijicon RMR / SRO
- Compatible Optics: RMR, SRO, Holosun 407C/507C/507Comp/508T and other RMR-footprint dots
- Platform Compatibility: Dan Wesson optics-ready slides: 1911, DWX, DWX Compact
- Type: Optic adapter plate
- Included Hardware: Plate-to-slide mounting screws
What’s Included
- Dan Wesson Optic Plate Adapter (Plate 1, RMR/SRO)
- Plate-to-slide mounting screws
Frequently Asked Questions
Which optics fit the Dan Wesson Optic Plate 1?
Plate 1 uses the Trijicon RMR/SRO footprint, so anything cut to that pattern will fit. That includes the Trijicon RMR and SRO along with popular Holosun dots like the 407C, 507C, 507Comp, and 508T. If your red dot advertises an RMR footprint, this is the correct plate.
Will this adapter plate fit my DWX and DWX Compact?
Yes. This is the factory plate for Dan Wesson optics-ready slides, and it's designed to work across the 1911, DWX, and DWX Compact. Since it's cut to match the OEM slide contour, you get a proper drop-in fit without milling or modifications.
What do I need to install the Dan Wesson optic plate correctly?
The plate comes with the screws to fasten it to your slide, and you'll want a quality torque driver plus Loctite on hand. Prep your threads, torque the screws to spec, and use blue Loctite so nothing backs out under recoil. A little patience during install goes a long way toward holding zero.
Do I need to shorten the screws for a Holosun dot?
Depending on your specific Holosun model, the optic mounting screws may need to be shortened for proper thread engagement. This is common when adapting Holosun optics and easy to sort out during install. Always confirm the screws bottom out on the plate rather than the optic housing before final torque.




Reviews
There are no reviews yet.