0
0

Rob Roberts RR3 Raptor Crio Plus Choke Tube 12 Gauge Stainless

UPC: 810174901856

$123.99

12 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

When the birds are hanging out past comfortable range and your standard factory choke just isn't holding a pattern together, the RR3 Raptor is the piece that changes the day. It's the tightest constriction in Rob Roberts' Raptor waterfowl series, purpose-built for geese and open-water ducks where every extra yard of dense pattern matters. This version is threaded for the Benelli Crio Plus system, so it drops into the newer Benelli guns built to accept those recessed-thread tubes.

What Sets the RR3 Raptor Apart

The Raptor line was developed using computerized pattern analysis to deliver a hotter, denser core than you'll get from most factory tubes. The internal cuts are the real story here, guiding the shot column for a tighter, more uniform payload downrange when you feed it the right loads. It's an extended, ported design, and that porting does double duty by helping tame muzzle rise so you can stay on a passing flock for that second shot.

Built From 17-4 PH Stainless

Rob Roberts machines these tubes from 17-4 PH U.S. stainless steel, which is about as tough and corrosion-resistant as it gets for gear that lives in a wet blind or a saltmarsh layout. That matters when you're hunting open water and your equipment takes a beating from spray, mud, and cold. The tolerances are held well beyond typical industry standards, which is a big part of why these chokes pattern as consistently as they do.

Pairing the RR3 With Your Loads

This choke shines with steel and approved non-toxic shot, and it was tuned right alongside Federal's Rob Roberts Raptor Steel waterfowl loads for exactly that reason. If you shoot an over/under, keep in mind the Raptor design is meant to run in a single barrel rather than both. Do a little patterning at the ranges you actually hunt, dial in your shell choice, and this tube will earn its spot in your bag.

Key Specifications

  • Model: RR3 Raptor Crio Plus
  • Manufacturer Part Number: 200276
  • UPC: 810174901856
  • Gauge: 12 Gauge
  • Choke System: Benelli Crio Plus
  • Constriction / Range: RR3 – Long Range
  • Intended Use: Geese and open-water ducks
  • Material: 17-4 PH U.S. Stainless Steel
  • Design: Extended, ported with internal cuts
  • Shot Compatibility: Steel and approved non-toxic shot
  • Series: Rob Roberts Raptor Waterfowl

What’s Included

  • Rob Roberts RR3 Raptor Crio Plus choke tube (1)

Frequently Asked Questions

What shotguns does the RR3 Raptor Crio Plus choke fit?

This tube is cut for the Benelli Crio Plus thread pattern, which covers most newer Benelli shotguns built from roughly 2008 forward. Guns like the M4, Nova, and Super Nova use the older Benelli Standard threads instead, so they take a different tube. If you're not certain which system your gun runs, check your owner's manual or measure the thread placement before ordering.

How is the RR3 different from the RR1 and RR2 in the Raptor lineup?

The Raptor series is split by range. The RR1 is the tightest close-range choice, the RR2 is a mid-range tube geared toward ducks and dove over decoys, and the RR3 is the long-range option built for geese and open-water ducks where you need the densest pattern at distance. Pick the one that matches how far your typical shots break.

Will the RR3 Raptor work with steel shot?

Yes, it's designed to pattern well with steel and other approved non-toxic waterfowl loads. Rob Roberts even worked with Federal to develop the Raptor Steel load line specifically to pair with these chokes. As always, spend a little time patterning your exact shell and shot size to confirm what stacks up best at your hunting ranges.

Can I run the RR3 Raptor in both barrels of my over/under?

No. The Raptor design is meant to be used in only one barrel of an over/under, since the geometry doesn't allow placement in both. Run it in the barrel you'll use for your longer shots and pair the other barrel with a more open tube.

Additional information

UPC

810174901856

Manufacturer

Manufacturer Part Number

200276

Caliber/Gauge

12 Gauge

Reviews

There are no reviews yet.

Be the first to review “Rob Roberts RR3 Raptor Crio Plus Choke Tube 12 Gauge Stainless”