Description
Rob Roberts built his reputation testing chokes until the patterns spoke for themselves, and the T2 is the one most folks end up leaving in the gun. It sits right in the middle of the Triple Threat family, roughly a light modified constriction, and it's the sweet spot for the majority of real-world shooting you'll do in a season. Think flooded timber mallards working the hole, dove over a cut field, sporting clays, and 16-yard trap. If you only want to own one choke and make it earn its keep, this is a strong pick.
What the T2 Triple Threat Does Best
Where the T1 runs more open and the T3 reaches out for long shots, the T2 splits the difference and holds tight, even patterns in that 25 to 45 yard window. That's the range where most birds actually get shot. It's a non-ported design, so you get clean pattern density without the extra muzzle noise that ported tubes bring to the blind. Plenty of waterfowlers run it with steel and non-toxic loads and see it grab larger shot better than the factory tube that came with their gun.
Built From 17-4 PH Stainless and Made in the USA
These tubes are machined from 17-4 PH U.S. stainless steel and cut to tolerances well past the usual industry standard. Roberts runs the outside and inside of each tube in a single setup on the lathe, which keeps everything concentric and means your point of impact stays put. The stainless holds up to lead, steel, HEVI-Shot, and other non-toxic loads, and it shrugs off the salt-air corrosion that eats cheaper tubes alive on the coast.
Fitment for Beretta and Benelli Mobil
This particular tube is cut for the 12 gauge Beretta/Benelli Mobil thread pattern, which covers guns like the Benelli SBE1 and Super 90 along with several Beretta Mobil-threaded models. Double-check your gun's thread pattern before ordering so you get the right fit, then pattern it with your go-to load to dial things in.
Key Specifications
- Manufacturer: Rob Roberts Gun Works
- Model: T2 Triple Threat
- Manufacturer Part Number: 200110
- UPC: 810174900194
- Gauge: 12 Gauge
- Thread Pattern: Beretta/Benelli Mobil
- Constriction Range: Mid-range (approx. light modified)
- Effective Range: About 25 to 45 yards
- Material: 17-4 PH U.S. Stainless Steel
- Design: Extended, non-ported
- Shot Compatibility: Lead, steel, and non-toxic loads
- Country of Origin: Made in USA
What’s Included
- Rob Roberts T2 Triple Threat Mobil 12 gauge choke tube
Frequently Asked Questions
What range is the Rob Roberts T2 choke best suited for?
The T2 is the mid-range tube in the Triple Threat lineup and holds even patterns from roughly 25 to 45 yards. That covers most of the shooting you'll do on flooded timber ducks, dove, sporting clays, and 16-yard trap. If you're taking longer pass shots on a regular basis, the tighter T3 is worth a look.
Will this T2 fit my shotgun?
This tube is cut for the 12 gauge Beretta/Benelli Mobil thread pattern, which fits guns like the Benelli SBE1 and Super 90 plus several Beretta Mobil-threaded models. Rob Roberts offers the T2 in a range of other thread patterns too, so confirm your gun's exact pattern before ordering. When in doubt, check your owner's manual or the markings on your factory choke.
Can I shoot steel and other non-toxic loads through the T2?
Yes. The 17-4 PH stainless construction handles lead, steel, HEVI-Shot, and other non-toxic loads without issue. As always, pattern your gun with the specific load you plan to hunt with to see how it performs before opening day.
Is the T2 ported?
No, the T2 is a non-ported design. That keeps pattern density clean while cutting down on the added muzzle blast you get from ported tubes, which is a nice touch when you're sitting in a blind or a tight timber hole.



Reviews
There are no reviews yet.