0
0

RCBS Full Length Die Set 25 GT – 2-Die Rifle Reloading Set

UPC: 850079710085

$52.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 25 GT is one of the newer wildcats picking up steam with long-range and PRS crowds, essentially a 6mm GT case necked up to hold .257 bullets for a little more punch on the heavies. Trouble is, feeding one has meant chasing down expensive, hard-to-find ammo. This RCBS set solves that. It gives you everything you need to load the 25 GT on a standard press and take control of your own accuracy.

What the 25 GT Full Length Set Handles

This is a two-die set built for bottleneck cases. The Full-Length Sizer Die brings your brass back to SAAMI minimum dimensions, sizing the outside of the case, knocking out the spent primer, and expanding the neck to accept the next bullet in one stroke. The die is vented to release trapped air and excess lube, which keeps you from denting shoulders, and headspace is held tight so you're not stretching case bodies during sizing. That kind of consistency is exactly what a cartridge like the 25 GT rewards.

Fit and Build on the 25 GT Dies

Both dies use the standard 7/8"-14 thread, so they'll thread right into nearly any single-stage or progressive press from RCBS, Hornady, Lee, Lyman, Redding, Dillon, and the rest. The Seater Die seats your bullet and applies crimp as the round being loaded calls for. Everything is machined from RCBS proprietary die steel, hand inspected, and made in America, which is a big reason these dies hold up load after load and year after year.

One thing worth flagging before you order: the shellholder is not included, so grab the correct one if you don't already have it on the bench. Same goes if you want a bushing-style neck tension setup, since that's handled by the MatchMaster line rather than this standard set. For most handloaders looking to feed a 25 GT reliably and accurately without breaking the budget, this is the straightforward, do-it-all starting point.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: 25 GT
  • Die Type: Full-Length 2-Die Set
  • Included Dies: Full-Length Sizer Die, Bullet Seater Die
  • Thread: 7/8"-14 Standard
  • Material: RCBS Proprietary Die Steel
  • Case Type: Bottleneck
  • Country of Origin: USA
  • Manufacturer Part Number: 23401
  • UPC: 850079710085
  • Shipping Weight: 0.26 lbs

What’s Included

  • Full-Length Sizer Die with Expander-Decapping Unit
  • Bullet Seater Die with Bullet Seater Plug
  • Storage box

Frequently Asked Questions

What comes in the RCBS 25 GT Full Length Die Set?

You get a two-die set: a Full-Length Sizer Die with an expander-decapping unit and a Bullet Seater Die with seater plug. The sizer resizes the case, removes the spent primer, and expands the neck, while the seater sets your bullet to depth and crimps as needed. Note that the shellholder is sold separately.

Will these dies fit my press?

Yes, both dies use the industry-standard 7/8"-14 thread, so they thread into just about any single-stage or progressive press. That covers RCBS, Hornady, Lee, Lyman, Redding, Dillon, and most others on the market. If your press accepts standard dies, you're good to go.

What exactly is the 25 GT and why load for it?

The 25 GT is a wildcat cartridge based on the 6mm GT case necked up to take .257-caliber bullets, aimed at long-range and precision competition. Because factory ammo is scarce and pricey, handloading is the practical way to keep one fed. This set brings RCBS quality to reloading that round on your own bench.

Do I need to lube cases with this die set?

Yes. This is a full-length rifle sizing die, and rifle brass always needs case lube before sizing to prevent stuck cases. Apply a light, even coat of case lube before running your 25 GT brass through the sizer and you'll be fine.

Additional information

UPC

850079710085

Manufacturer

Manufacturer Part Number

23401

Shipping Weight

0.26

Reviews

There are no reviews yet.

Be the first to review “RCBS Full Length Die Set 25 GT – 2-Die Rifle Reloading Set”